Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

derailleur bracket

  • 17-11-2019 12:04pm
    #1
    KAGY
    Registered Users, Registered Users 2 Posts: 1,092 ✭✭✭


    Derailleur on a kids bike got mangled, bought a new one (Shimano tourney, same model as was on it) but it looks like its meant to screw onto the frame, whereas the one that was on it has an extra bracket.

    I can't find anything on a Google search, can I even get an adapter?

    Thanks
    495494.jpg


Comments

  • #2
    KAGY
    Registered Users, Registered Users 2 Posts: 1,092 ✭✭✭KAGY


    Nevermind, found this image
    howtoderailleuradjustment_partsofthederailleur.jpg

    So now I know I'm looking for the hanger.


  • #3
    68 lost souls
    Registered Users, Registered Users 2 Posts: 3,997 ✭✭✭68 lost souls


    The hanger is a separate part, of the deralier got mangled it was probably a bent hanger though too. Take the hanger off the old one and check if it’s straight or bent. Should be able to bend it back if it’s not bad and use that one.

    Failing that they are bike specific so you will have to find one that matches that make and model.


  • #4
    magicbastarder
    Moderators, Category Moderators, Arts Moderators, Sports Moderators Posts: 50,161 CMod ✭✭✭✭magicbastarder


    i would be wary of reusing a bent hanger if at all possible. there are a few sites specialising in replacement hangers, e.g.
    https://derailleurhanger.com/


  • #5
    lescol
    Registered Users, Registered Users 2 Posts: 648 ✭✭✭lescol


    From your picture it would be a hanger with a bolt:- https://www.sjscycles.co.uk/gear-spares/shimano-compatible-rear-gear-hanger-bracket/

    however, Shimano Tourney rear derailleur is available with the bracket attached:- https://www.sjscycles.co.uk/derailleurs-rear/shimano-tourney-rda070-7-speed-road-rear-derailleur-with-mounting-bracket/

    Maybe the shop you bought the derailleur from will exchange it for one with the hanger fitted.


  • #6
    KAGY
    Registered Users, Registered Users 2 Posts: 1,092 ✭✭✭KAGY


    lescol wrote: »

    however, Shimano Tourney rear derailleur is available with the bracket attached:-

    Maybe the shop you bought the derailleur from will exchange it for one with the hanger fitted.

    I see that now, unfortunately it was an amazon purchase quite a few weeks back. The original one obv had the hanger attached but its not detachable. Its fairly bent anyway. The one you linked looks right


  • Advertisement
  • #7
    Type 17
    Registered Users, Registered Users 2 Posts: 2,731 ✭✭✭Type 17


    Any decent bike shop should do a swap, if they have the right one in stock, and the one you're bringing in is re-saleable (new and undamaged).

    If you're asking a shop on the phone, you should say that you bought the hanger-mount version by mistake, and you'd like to swap it for an axle-mount version.


Advertisement