Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

HKC Sabb wired sounder LED lights

  • 03-04-2021 10:09pm
    #1
    briano66
    Registered Users Posts: 1 ✭


    Hi All,
    Hopefully someone will know the answer to this question.
    I've installed a new HKC SABB wired sounder. I was hoping that the LEDs would have a different sequence when armed & disarmed. Mine alternate left right about every second or so, irrespective of whether the alarm is armed or not. Is that correct and how they normally work?
    Can I configure the board to only power the LEDs when the alarm is actually armed? If not, can I add another LED to show the alarm is armed? The alarm is fitted to my shed which is about 150M from my house and I want to be able to confirm that the alarm is on without opening the doors. Different people have access to the building and I just want to be able to see the shed is armed at night from the outside of the building.
    Thanks.


Comments

  • #2
    kub
    Registered Users, Registered Users 2 Posts: 6,555 ✭✭✭kub


    briano66 wrote: »
    Hi All,
    Hopefully someone will know the answer to this question.
    I've installed a new HKC SABB wired sounder. I was hoping that the LEDs would have a different sequence when armed & disarmed. Mine alternate left right about every second or so, irrespective of whether the alarm is armed or not. Is that correct and how they normally work?
    Can I configure the board to only power the LEDs when the alarm is actually armed? If not, can I add another LED to show the alarm is armed? The alarm is fitted to my shed which is about 150M from my house and I want to be able to confirm that the alarm is on without opening the doors. Different people have access to the building and I just want to be able to see the shed is armed at night from the outside of the building.
    Thanks.


    As per EN 50131 standard, there can be no indication on an alarm system that is is armed or not at any time in full set mode.

    The LED's on a bell box do not and cannot be configured that way, their function is purely as a deterrent.


Advertisement