Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

12 inch Mitre saw blade recommendations?

  • 27-10-2020 9:03pm
    #1
    mobfromcork
    Registered Users, Registered Users 2 Posts: 379 ✭✭


    Hi folks,
    I've got a Bosch 305mm/12 inch sliding mitre saw and need to replace the blade. It has the original Bosch 80 tooth blade on it which was great for really smooth cuts but I ended up cutting hundreds of sleepers and 6x3s on it over the last few weekends and have pretty much wrecked the blade. Thinking if buying 2 new blades in the next week, one for rougher cuts (still have a good bit of outdoor stuff to cut) and one for finer stuff.
    Any recommendations?
    Thanks
    Mark


Comments

  • #2
    Double Barrel
    Registered Users, Registered Users 2 Posts: 1,464 ✭✭✭Double Barrel


    Bosch, DeWalt, Makita etc. are all of decent quality.
    For rough stuff sleepers etc. 305 x 30mm x 24T and 48Tooth
    For finer work 60 or 80 tooth.

    High quality long lasting industrial blades : Forrest, Frued Premier Fusion ,Tenryu Gold Medal, Ridge Carbide TS2000, Infinity Super General etc.


  • #3
    mobfromcork
    Registered Users, Registered Users 2 Posts: 379 ✭✭mobfromcork


    Thanks for the reply. I have a few DeWalt tools but was never too impressed with their accessories - drill bits etc. I'll price around for the other brands you mentioned and see if I can find a good balance of price/quality for my usage.


  • #4
    Corkey123
    Registered Users, Registered Users 2 Posts: 760 ✭✭✭Corkey123


    I'd recommend a CMT blade

    See https://www.jjacksontools.com/

    Located in Kilcoole, Co Wicklow


  • #5
    [Deleted User]
    Posts: 3,637 ✭✭✭ [Deleted User]


    Seconded.


  • #6
    mobfromcork
    Registered Users, Registered Users 2 Posts: 379 ✭✭mobfromcork


    Thanks for the recommendation, I knew I had seen those recommended at some stage over the last few months on this forum but couldn't find the thread when I searched. I just emailed them there.


  • Advertisement
Advertisement