Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Door paint

Comments

  • #2
    looksee
    Registered Users, Registered Users 2 Posts: 28,767 ✭✭✭✭looksee


    That looks as though it is not paint, it is something like a vinyl wrap that is heated and sealed onto the doors. Sometimes it lasts well, quite often it does that.

    I am not sure you can repair it. If the whole of the foil will come off you could try cleaning it and painting normally, but the chances of getting a good surface are a bit low. Usually you need to replace the door.

    Someone may know a way of doing it, but that is my experience.


  • #3
    Johnthemanager
    Registered Users, Registered Users 2 Posts: 250 ✭✭Johnthemanager


    looksee wrote: »
    That looks as though it is not paint, it is something like a vinyl wrap that is heated and sealed onto the doors. Sometimes it lasts well, quite often it does that.

    I am not sure you can repair it. If the whole of the foil will come off you could try cleaning it and painting normally, but the chances of getting a good surface are a bit low. Usually you need to replace the door.

    Someone may know a way of doing it, but that is my experience.

    You can get a heat gun to it, and the rest should peel off. You can then prime and re paint them. Just make sure you get all the adhesive off.


Advertisement