Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Replacement Shimano road shifters

  • 01-11-2012 12:47am
    #1
    eoin88
    Registered Users Posts: 117 ✭✭


    Discovered this evening that my left hand shifter is fubar, so need to find a replacement. It's a 9-speed double Tiagra. Saw single replacements on CRC for about €90, is this about as good as I'm going to get? I assume upgrading to 105 or Ultegra is out of the question these days for a 9-speed?


Comments

  • #2
    el tel
    Registered Users, Registered Users 2 Posts: 2,991 ✭✭✭el tel


    A Shimano 10 speed shifter will work ok with a 9 speed setup. It will also give you a little more choice when it comes to replacing your defective one.

    Edited to add: the left hand shifter is the front chainring shifter...any Shimano double shifter will work with that.


  • #3
    cdaly_
    Registered Users, Registered Users 2 Posts: 6,440 ✭✭✭cdaly_


    el tel wrote: »
    A Shimano 10 speed shifter will work ok with a 9 speed setup. It will also give you a little more choice when it comes to replacing your defective one.

    You'll need to use an alternative cable routing to use a 10-sp shifter with a 9-sp cassette.


  • #4
    Tonyandthewhale
    Registered Users, Registered Users 2 Posts: 1,867 ✭✭✭Tonyandthewhale


    cdaly_ wrote: »
    You'll need to use an alternative cable routing to use a 10-sp shifter with a 9-sp cassette.

    Not an issue with the left-hand shifter though.


  • #5
    rp
    Users Awaiting Email Confirmation Posts: 1,227 ✭✭✭rp


    eoin88 wrote: »
    Discovered this evening that my left hand shifter is fubar, so need to find a replacement. It's a 9-speed double Tiagra.
    I've probably got a set of old 9-speed Ultegra shifters in the shed somewhere: a bit scuffed and with a missing faceplate if I remember, but functional. Yours if you want them.


  • #6
    smacl
    Moderators, Society & Culture Moderators Posts: 15,776 Mod ✭✭✭✭smacl


    eoin88 wrote: »
    Discovered this evening that my left hand shifter is fubar, so need to find a replacement. It's a 9-speed double Tiagra. Saw single replacements on CRC for about €90, is this about as good as I'm going to get? I assume upgrading to 105 or Ultegra is out of the question these days for a 9-speed?

    Noticed a set of Dura Ace 9 speed shifters on the adverts section for €130. Could be worth a punt, though _rp's offer seems very generous.


  • Advertisement
  • #7
    eoin88
    Registered Users Posts: 117 ✭✭eoin88


    cdaly_ wrote: »
    You'll need to use an alternative cable routing to use a 10-sp shifter with a 9-sp cassette.

    That's interesting, as a 10-speed 105 shifter is the same price as the 9-speed Tiagra. Would be nice to have the hidden cabling!

    I took it to the lbs yesterday and the guy there said it's usually the left shifter that goes. Is this generally the case? I'm not sure if I should replace both shifters now, seeing as it is quite an expensive job. The bike is about 3 years old and has seen a lot of action over the last 12 months in particular. My original thinking was to upgrade to 105 or Ultegra in stages when the various components got worn out.


  • #8
    eoin88
    Registered Users Posts: 117 ✭✭eoin88


    Thanks for the heads up smacl, never thought I'd be able to afford Dura Ace!

    rp, I just sent you a pm.


Advertisement