Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
WE G39c with lots of spare parts.
-
15-06-2018 10:54pm#1I've a WE G39c in working condition. I had issues with it cycling as in my previous post, but I got it working by switching to a factory trigger group. It chugs along on some mags so could use some tinkering but is skirmishable in its current state.
Parts include spare receiver with barrel and all external parts, two trigger housings, factory trigger parts, RA-Tech Steel Trigger assembly, spare NPAS, spare standard nozzle, spare bolt and return spring, spare FG-airsoft FPS regulator discs, 6 working magazines and one magazine for spare parts.
FPS is adjustable due to NPAS.
Asking for 200 ONO, paypal or cash. Can do postage or can meet up in Wicklow area.
0
Comments
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
-
-
-
-
-
Advertisement
-
-
-
Is the dissembled 2nd rif all there bronty..?
Sorry for the late reply, there's enough of everything to complete the second RIF:
So apart from the complete RIF there's the receiver and barrel/hop, magwell, pistolgrip, trigger housing x2, trigger components apart from the hammer, a complete trigger group with RA-Tech parts, two nozzles, one bolt carrier, NPAS x2, regulator discs for reducing FPS without needing NPAS and all the other small parts needed.
Issues with the first RIF: like I said on some mags the cycle rate is reduced, some fail to lock back. Do note that full auto on these seldom if ever works, it will just barely spit BBs out the barrel with enough power.
Issues with second RIF: the RA-Tech trigger group I was having issues with, it wouldn't strike the magazine valve hard enough to properly cycle the bolt. It's an issue with the valve striker and valve knocker springs. That's why I bought a factory WE trigger group for the first RIF. Apart from that there are two nozzles so it should be doable to get it running, if not it's a lot of spare parts.
Externally I've only one charging handle (these are notorious for breaking, can replace them cheap or buy the RA-Tech aluminium version). Missing some rail pieces and a flash hider. The top rail on both have been modified as you can see.0 -
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
Advertisement
Advertisement