Unusual internal door hardware

Calahonda52 · 21-01-2019 5:41pm #1

Pic one shows a hollow brass rod, threaded internally, that passes through the lock like the one in the link below: it has two M4 or similar, pozi-1 bolts that thread in from both sides and tighten up the lot, with no need for grub screws through the handle into the square bar. [I had to clip the heads off the bolts to get the piece out as the threads are stripped inside the brass rod

https://www.manomano.co.uk/internal-door-lever-door-handles/hafele-plain-safety-lever-door-handles-aluminium-1-pair-20mm-2614720

Any thoughts on where I might source the kit.
Thanks as always

dok_golf · 21-01-2019 11:01pm

If you email Karl Henry at The Door Centre in Galway, he should be able to sort you. He's very good at sourcing what the customer wants

Bonzo Delaney · 21-01-2019 11:06pm

There's a similar set up on all the euro spec handles
It's a male / female set up as opposed to what you have of two screws in to either side of an internally threaded sleeve .
Any local hardware should have boxes of these handles.
They might give you a packet out if a sample box if you ask nicely .
Was in a similar situation myself and the store gave me a few packets they had lying around .

Who2 · 21-01-2019 11:07pm

Doors plus floors north road finglas. I know they used to sell those handles and hardware.

Unusual internal door hardware

Comments