Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Burning on plug of electric radiator when plugged into timer socket

  • 11-02-2019 11:40pm
    #1
    Cianos
    Registered Users, Registered Users 2 Posts: 4,850 ✭✭✭


    Hi there,
    Had an electric radiator that plugged into a timer socket (€5, bought in Power City) and we noticed burning around the plug and the socket.

    Picture gallery can be seen here; https://imgur.com/a/bWhZLm5

    Wondering what could have caused this? Obviously don't want it to happen again.

    Would it be a fault with the timer socket, or the plug/radiator?

    Thanks for reading


Comments

  • #2
    2011
    Moderators, Home & Garden Moderators, Technology & Internet Moderators, Regional East Moderators Posts: 12,602 Mod ✭✭✭✭2011


    Cianos wrote: »
    Hi there,
    Had an electric radiator

    = Relatively large electrical load.

    plugged into a timer socket (€5, bought in Power City)

    = cheap and of questionable quality

    The moral of the story is that you shouldn’t supply electrical loads of thy size from a device of that quality. Luckily you caught this in time.


  • #3
    Cianos
    Registered Users, Registered Users 2 Posts: 4,850 ✭✭✭Cianos


    The timer said 3500w capacity and the heater is 2000w.

    I thought a fiver was a bit cheap alright but assumed it'd not be a fire hazard when used within its advertised limitations and sold by a big outfit like Powercity (as opposed to buying it off a dodgy website or whatever).

    Is it really just down to the timer plug being cheap tat?


  • #4
    brightspark
    Registered Users, Registered Users 2 Posts: 2,637 ✭✭✭brightspark


    Can't be certain but it looks like there was more heat in the plugtop. I've seen some plugtops where the fuse was loose in the clip.

    Check for damage where the heater was previously plugged in.


  • #5
    monseiur
    Registered Users, Registered Users 2 Posts: 1,283 ✭✭✭monseiur


    A simple process of elimination is -
    1. Fit new plug on heater, then plug directly into socket (not the socket used previously) after say an hour check plug if OK..........go to step 2
    2. Using the same socket - plug heater this time using timer after some time check both plug & timer if everything is OK repeat steps one and two above using the original socket.
    Do not leave heater unattended while carrying out the above in case of fire etc.
    M.


  • #6
    brightspark
    Registered Users, Registered Users 2 Posts: 2,637 ✭✭✭brightspark


    To be clear, regardless of what was the initial problem both plug and timer are now unsafe to use.


  • Advertisement
Advertisement