uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Click here to find out more x
Post Reply  
Thread Tools Search this Thread
26-10-2020, 10:10   #1
Registered User
Join Date: Sep 2003
Posts: 482
Help me tune my FTA channels

I have a 5x8 multiswitch sending signal to a number of TV's.
Somebody has tuned the FTA channels out of a Walker TV and I cannot tune then back in.
I have done a First Installation a number of times. Set on Astra 2.
86 transponders found but no channels.
I have also swapped the 2 fly leads at the output side of the diplexer. Not sure if I should have done this ?
joebre is offline  
26-10-2020, 11:49   #2
Elvis Hammond
Registered User
Join Date: Sep 2014
Posts: 284
If you now have the terrestrial output of the diplexer feeding the satellite tuner, obviously that isn't going to work.

How were the satellite channels 'tuned out'?
Elvis Hammond is offline  
26-10-2020, 13:23   #3
Gerry Wicklow
Registered User
Join Date: Dec 2009
Posts: 3,541
If it's not too big/heavy can you take the TV to another room with a known good connection and run the setup from there to eliminate whether it is a cable problem. Alternately if you can take one of the working TVs to the questionable room, again to eliminate the cabling from the debate.
Gerry Wicklow is offline  
Post Reply

Quick Reply
Remove Text Formatting

Insert Image
Wrap [QUOTE] tags around selected text
Decrease Size
Increase Size
Please sign up or log in to join the discussion

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Share Tweet