Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Connecting two boilers back into one unit

  • 18-04-2019 3:34pm
    #1
    Registered Users, Registered Users 2 Posts: 1,375 ✭✭✭


    Hi all,

    We have bought a house and it’s concerted into two seperate units.

    Upstairs and downstairs have there own boiler and heating controls which means we have two seperate bills and have to turn both on to heat whole house.

    If we want to connect them back from the existing two into one boiler (preferably to the boiler downstairs as it’s new) would this be a big job and costly to do?

    Thanks


Comments

  • Registered Users, Registered Users 2 Posts: 3,960 ✭✭✭jimf


    you really would need to get a plumber to look at the set up for you


    may sound stupid but will one boiler be capable of heating whole house


  • Registered Users, Registered Users 2 Posts: 12,839 ✭✭✭✭Dtp1979


    How big is the house? How many radiators approx?


  • Registered Users, Registered Users 2 Posts: 23,648 ✭✭✭✭ted1


    Each is probably scaled to the unit it supplies. So you are probably looking st ripping it all out and starting again. 8.k+


  • Registered Users, Registered Users 2 Posts: 1,375 ✭✭✭bri007


    Thanks for the reply.

    Ah ok, I was thinking it wouldn’t be cheap to do. Looks like we have to leave it as is so!
    ted1 wrote: »
    Each is probably scaled to the unit it supplies. So you are probably looking st ripping it all out and starting again. 8.k+


  • Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    I'd say it just depends on the size of the house and everything. If cost is a concern, I'd say it's a thing to be done when one of the boilers needs to be replaced anyway.


  • Advertisement
  • Hosted Moderators Posts: 3,496 ✭✭✭DGOBS


    I would say there is lots variables to this question, too many to be fully answered here.

    You would be best to get an RGI plumber out to have a look and give you an estimate, most likely if the 'joining' of the system was straight forward, you would still most likely need to replace the boiler(s) with a larger appliance capable of heating both zones.


Advertisement