If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Siamp Inlet Valve won't shut off

christo82 · 2019-02-19 18:23:36

Sorry, the title should read Siamp. (Heading corrected Wearb)Hi, I recently had a problem with my Siamp inlet valve in my toilet. The model is similar to a 99B. It was refilling very slowly so I took it apart and saw the Diaphragm washer was torn into two pieces. So I bought a replacement and fitted it, but now the inlet…

19-02-2019 7:23pm

#1

christo82

Registered Users, Registered Users 2 Posts: 737 ✭✭✭

Join Date: December 2005

Posts: 586

Sorry, the title should read Siamp. (Heading corrected Wearb)Hi, I recently had a problem with my Siamp inlet valve in my toilet. The model is similar to a 99B. It was refilling very slowly so I took it apart and saw the Diaphragm washer was torn into two pieces. So I bought a replacement and fitted it, but now the inlet is not turning off when the float is raised. The float goes to the very top, but still water keeps coming in. I think I may have inadvertently lost a piece from the lever assembly. I read that there should be a clear silicone pad inside the lever arm closes the hole and creates pressure to tighten the seal. Is there anywhere I can buy a replacement silicone pad or does anyone know the exact look and size of it?

Thanks
Chris

0