Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

What sander should I buy?

  • 06-04-2020 6:57pm
    #1
    august12
    Registered Users, Registered Users 2 Posts: 1,275 ✭✭✭


    Need a sander for mahogany skirting board and mahogany doors and frames, I've a whole house to do, do I need to sand back to original wood, it has already been stained/varnished, don't plan on staining again but priming and satin paint finish so want to do it right first time, anyone any experience with this and could advise what sander to make job as pleasant as possible and how/what I need to do.


Comments

  • #2
    tabby aspreme
    Registered Users, Registered Users 2 Posts: 4,034 ✭✭✭tabby aspreme


    You don't need to sand back to bare wood for painting, just a light surface sanding to give the primer a key. If you could get some 120 grit Abranet it would make the job much easier than using regular sandpaper and 240 grit Abranet for sanding before the final coat of paint, you will probably have to look for the Abranet online, there is no need to buy a sander, but you could get the Abranet sanding block which can be connected to a vacuum to make the job easier


  • #3
    cletus
    Registered Users, Registered Users 2 Posts: 8,050 ✭✭✭cletus


    I presume that Mirka system can't be connected directly to your vacuum, but needs a collection system in between, like those cyclone collectors


  • #4
    recipio
    Registered Users, Registered Users 2 Posts: 2,804 ✭✭✭recipio


    cletus wrote: »
    I presume that Mirka system can't be connected directly to your vacuum, but needs a collection system in between, like those cyclone collectors

    There is a plastic gizmo available online which will connect a Mirka sander to the Numatic series of vacuums. Mirka of course sell a dedicated vacuum - for a big price.The OP would probably be better off getting a regular sander with a bag for a one off project ?


  • #5
    august12
    Registered Users, Registered Users 2 Posts: 1,275 ✭✭✭august12


    Thanks for all the replies, I have a Henry neumatic so thats half the battle, so a sanding block and light sanding is sufficient and then primer and sand again and then top coat. Is that correct.


  • #6
    [Deleted User]
    Posts: 3,637 ✭✭✭ [Deleted User]


    august12 wrote: »
    Thanks for all the replies, I have a Henry neumatic so thats half the battle, so a sanding block and light sanding is sufficient and then primer and sand again and then top coat. Is that correct.

    Correct.

    The Mirka kit and abranet is excellent. Ideally suited to the job you're taking on.


  • Advertisement
  • #7
    august12
    Registered Users, Registered Users 2 Posts: 1,275 ✭✭✭august12


    JayZeus wrote: »
    Correct.

    The Mirka kit and abranet is excellent. Ideally suited to the job you're taking on.
    There are quite a few sizes of sanding blocks in this range, any idea what I should get, mostly skirting boards and door frames with lots of grooves,


Advertisement