Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Advise on loose dado rail

  • 04-04-2018 12:30pm
    #1
    [Deleted User]
    Posts: 0 ✭


    Hello..I am looking for advice on how to fix a dado rail..Its over the radiator..I know now the screw should have been near where the two pieces join..It looked fine until the radiator was on all the time..The secion is a bout 5 foot long..I would prefer not to find screws,and take off,and put it on again...Any way I could do a job on it,while its in place..I was thinking a small drill hole through the wood,and then a nail,get it below the wood,and cover up,as I did with all the screw heads..


Comments

  • #2
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    .


  • #3
    listermint
    Registered Users, Registered Users 2 Posts: 34,105 ✭✭✭✭listermint


    Your dado rail has been broken for a whole year ?


  • #4
    Lex Luthor
    Registered Users, Registered Users 2 Posts: 11,220 ✭✭✭✭Lex Luthor


    maybe do what you are doing with the idea of a nail but use plasterboard screws instead
    Drill a hole through the dado, then drill a bigger hole a couple of mm deep just bigger than the diameter of the screw head
    Screw the screw into the wood and then into wall with the screw heard just going below the surface of the dado, fill and paint


  • #5
    antiskeptic
    Registered Users, Registered Users 2 Posts: 9,555 ✭✭✭antiskeptic


    Deleted User wrote: »
    Hello..I am looking for advice on how to fix a dado rail..Its over the radiator..I know now the screw should have been near where the two pieces join..It looked fine until the radiator was on all the time..The secion is a bout 5 foot long..I would prefer not to find screws,and take off,and put it on again...Any way I could do a job on it,while its in place..I was thinking a small drill hole through the wood,and then a nail,get it below the wood,and cover up,as I did with all the screw heads..

    Prise it away from the wall without pulling it loose, squirt some MS11/TEC7 down the gap from above and below. Lean something heavy against it, some chairs with weight on them, a book case, whatever. Wipe excess clear (there won't be much if you get it deep down and don't go over the top). Wait a day then remove. You won't need any nails


  • #6
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    listermint wrote: »
    Your dado rail has been broken for a whole year ?

    No lol..I was trying to delete that old post..I just ended up making a new blank post..😅


  • Advertisement
Advertisement