Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Help me tune my FTA channels

Options
  • 26-10-2020 11:10am
    #1
    joebre
    Registered Users Posts: 551 ✭✭✭


    I have a 5x8 multiswitch sending signal to a number of TV's.
    Somebody has tuned the FTA channels out of a Walker TV and I cannot tune then back in.
    I have done a First Installation a number of times. Set on Astra 2.
    86 transponders found but no channels.
    I have also swapped the 2 fly leads at the output side of the diplexer. Not sure if I should have done this ?


Comments

  • Options
    #2
    Elvis Hammond
    Registered Users Posts: 491 ✭✭Elvis Hammond


    If you now have the terrestrial output of the diplexer feeding the satellite tuner, obviously that isn't going to work.

    How were the satellite channels 'tuned out'?


  • Options
    #3
    Gerry Wicklow
    Registered Users Posts: 4,542 ✭✭✭Gerry Wicklow


    If it's not too big/heavy can you take the TV to another room with a known good connection and run the setup from there to eliminate whether it is a cable problem. Alternately if you can take one of the working TVs to the questionable room, again to eliminate the cabling from the debate.


Advertisement