Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Farming Chit Chat sticks it to six.

1242243245247248334

Comments

  • Registered Users, Registered Users 2 Posts: 399 ✭✭marathon


    Are glanbias generally dearer for fencing equipment


  • Registered Users, Registered Users 2 Posts: 5,564 ✭✭✭Grueller


    marathon wrote: »
    Are glanbias generally dearer for fencing equipment

    For almost everything in my experience.


  • Registered Users, Registered Users 2 Posts: 7,743 ✭✭✭ganmo


    sweet jasus!
    that'd be a shocking land to get

    has to be a pack of some kind


  • Registered Users, Registered Users 2 Posts: 1,786 ✭✭✭weatherbyfoxer


    Grueller wrote: »
    For almost everything in my experience.

    They take serious squeasing to get a good deal


  • Registered Users, Registered Users 2, Paid Member Posts: 4,397 ✭✭✭davidk1394


    marathon wrote: »
    Looking to fence the boundaries of farm with sheep wire where would be cheapest place to buy sheep wire stakes n barbed wire in southeast

    Which part are you in ? Only sheep wire to buy is tornado. Bought off a lad called Willie cuddihy for €105 a roll


  • Advertisement
  • Moderators, Society & Culture Moderators Posts: 12,984 Mod ✭✭✭✭blue5000


    marathon wrote: »
    Are glanbias generally dearer for fencing equipment
    Grueller wrote: »
    For almost everything in my experience.

    Except fcuking barley at harvest time:(

    If the seat's wet, sit on yer hat, a cool head is better than a wet ar5e.



  • Registered Users, Registered Users 2 Posts: 399 ✭✭marathon


    davidk1394 wrote: »
    Which part are you in ? Only sheep wire to buy is tornado. Bought off a lad called Willie cuddihy for €105 a roll

    Near Corey?


  • Registered Users, Registered Users 2 Posts: 4,125 ✭✭✭visatorro


    Changed a flat tyre for an elderly lady this morning, that's the good deed done for the day.


  • Registered Users, Registered Users 2 Posts: 734 ✭✭✭longgonesilver



    None of the animals had been savaged.

    That would be strange I think. Were the dogs muzzled?


  • Registered Users, Registered Users 2, Paid Member Posts: 11,828 ✭✭✭✭Base price


    None of the animals had been savaged.

    That would be strange I think. Were the dogs muzzled?
    I was thinking about this and it may not be a result of a direct attack. Could be a pack of hunt hounds or people hunting with lurchers/sighthounds neither of which would be normally associated with attacking livestock.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 4,393 ✭✭✭orm0nd


    None of the animals had been savaged.

    That would be strange I think. Were the dogs muzzled?


    happened here in Ireland a few years

    sheep flew into a corner of a shed & went 7 or more high on top of 1 another, no hope for the ones underneath


  • Closed Accounts Posts: 14,241 ✭✭✭✭Kovu


    Crap. I had it in my head that GLAS watercourses were to be fenced 1m from the bank, not 1.5m. Good bit of moving to do so!


  • Closed Accounts Posts: 20,621 ✭✭✭✭Buford T. Justice XIX


    Just got called for jury duty.

    If I was an employee or apprentice, I would get paid as normal but as self-employed I have to pay a replacement to do my work for me.

    I may have picked the wrong career:rolleyes:


  • Registered Users, Registered Users 2, Paid Member Posts: 11,828 ✭✭✭✭Base price


    Just got called for jury duty.

    If I was an employee or apprentice, I would get paid as normal but as self-employed I have to pay a replacement to do my work for me.

    I may have picked the wrong career:rolleyes:
    Freggin crazy system.
    "All animals are equal, but some are more equal than other's" -
    :rolleyes::rolleyes:


  • Registered Users, Registered Users 2 Posts: 11,292 ✭✭✭✭Nekarsulm


    Just got called for jury duty.

    If I was an employee or apprentice, I would get paid as normal but as self-employed I have to pay a replacement to do my work for me.

    I may have picked the wrong career:rolleyes:

    Just pray you don't get a Graham Dwyer type case. Ten weeks, wasn't it?


  • Registered Users, Registered Users 2 Posts: 24,701 ✭✭✭✭Reggie.


    Just got called for jury duty.

    If I was an employee or apprentice, I would get paid as normal but as self-employed I have to pay a replacement to do my work for me.

    I may have picked the wrong career:rolleyes:
    Ah the joys of being exempt


  • Registered Users, Registered Users 2 Posts: 734 ✭✭✭longgonesilver


    Just got called for jury duty.

    If I was an employee or apprentice, I would get paid as normal but as self-employed I have to pay a replacement to do my work for me.

    I may have picked the wrong career:rolleyes:

    If you want to try to get out of it you can claim to be irreplaceable/cant find a suitable replacement.

    Do it in writing immediately. Sole traders/ trades/shopkeepers get out this way. You might have to go in the first day and swear before the judge.

    Otherwise you might be in and out for weeks and never even get called.

    What court and for how long.?


  • Closed Accounts Posts: 20,621 ✭✭✭✭Buford T. Justice XIX


    If you want to try to get out of it you can claim to be irreplaceable/cant find a suitable replacement.

    Do it in writing immediately. Sole traders/ trades/shopkeepers get out this way. You might have to go in the first day and swear before the judge.

    Otherwise you might be in and out for weeks and never even get called.

    What court and for how long.?

    Circuit court and no length specified.

    I'll fire off a letter tomorrow and tell them they'll have to wait for me if there's a cow calving and I'll have to be off at 1 for the school collection.

    Of course I'll be back at 3.30 once they are collected and fed.


  • Registered Users, Registered Users 2 Posts: 11,171 ✭✭✭✭Muckit


    Kovu wrote: »
    Crap. I had it in my head that GLAS watercourses were to be fenced 1m from the bank, not 1.5m. Good bit of moving to do so!

    Just got a text from planner that the deadline has been extended to 31st July. Makes sense for year that's in it, a lot of rivers burst their banks.

    it's not from the bank, it's from the top of the bank, so you might be ok.

    The locations for my solitary bee sand piles under 2' of water. What to do. what to do. Might have to make raised platforms no joke


  • Registered Users, Registered Users 2 Posts: 7,743 ✭✭✭ganmo


    Muckit wrote: »
    Just got a text from planner that the deadline has been extended to 31st July. Makes sense for year that's in it, a lot of rivers burst their banks.

    it's not from the bank, it's from the top of the bank, so you might be ok.

    The locations for my solitary bee sand piles under 2' of water. What to do. what to do. Might have to make raised platforms no joke

    Is that for everything or just fencing water courses?


  • Advertisement
  • Closed Accounts Posts: 14,241 ✭✭✭✭Kovu


    Muckit wrote: »
    Just got a text from planner that the deadline has been extended to 31st July. Makes sense for year that's in it, a lot of rivers burst their banks.

    it's not from the bank, it's from the top of the bank, so you might be ok.

    The locations for my solitary bee sand piles under 2' of water. What to do. what to do. Might have to make raised platforms no joke

    What exactly is the top of the bank though? I noticed it earlier on the glas specs but took it to mean the edge of the field before it slops down.


  • Registered Users, Registered Users 2 Posts: 11,171 ✭✭✭✭Muckit


    Well l suppose it depends on your situation. my watercourse has the spoil 'banked' or mounded up on the sides. So I'm taking the top of the bank to mean fron the top of the mound straight out, not from the bottom of the mound on the field side, if you get me. A diagram would make it easier to explain.

    Now if your watercourse has no mound, well then its from the edge of where the field meets edge of bank.

    l assume it's single strand electric ye are going with. Did ye get a postdriver or digger to drive stakes or drive them by hand? Are you using mild steel wire or high tensile wire?

    l drove 5' stakes and used the stake as a measure, as it's just over 1.5m. ;)


  • Registered Users, Registered Users 2 Posts: 11,171 ✭✭✭✭Muckit


    ganmo wrote: »
    Is that for everything or just fencing water courses?

    Just talking about watercourse fences. Now don't take it as gospel, as either am l. I will have it up before the original deadline anyhow as it's late to be finding out about this. l'd ring the Glas office in Johnstown Castle, Wexford. Found them v helpful. 053 916 3400


  • Closed Accounts Posts: 14,241 ✭✭✭✭Kovu


    Muckit wrote: »
    Well l suppose it depends on your situation. my watercourse has the spoil 'banked' or mounded up on the sides. So I'm taking the top of the bank to mean fron the top of the mound straight out, not from the bottom of the mound on the field side, if you get me. A diagram would make it easier to explain.

    Now if your watercourse has no mound, well then its from the edge of where the field meets edge of bank.

    l assume it's single strand electric ye are going with. Did ye get a postdriver or digger to drive stakes or drive them by hand? Are you using mild steel wire or high tensile wire?

    l drove 5' stakes and used the stake as a measure, as it's just over 1.5m. ;)

    We have both the different kinds but I know what you mean. One has it banked up a bit and slopes down, the other falls straight into the river. I was counting from the highest point beside the river (within reason) & the edge where it falls down. Fencing is currently about 2 or three foot out from it max. Going to go with a double strand of barbed, with a nice gap for cows to eat through ;)
    Hand driven stakes......I'll be sick of the sight of sledges and crowbars by the end of it. Have a length of wood at about 60 inches to use as a measure, not sure of the stakes we'll use yet!


  • Registered Users, Registered Users 2 Posts: 9,547 ✭✭✭tanko


    This farming life on BBC2 now.


  • Registered Users, Registered Users 2 Posts: 11,171 ✭✭✭✭Muckit


    Ye must be hoping for a very lenient inspector! :D wouldn't count that as being anyway 'stockproof' for cows, let alone calves!!


  • Closed Accounts Posts: 14,241 ✭✭✭✭Kovu


    Muckit wrote: »
    Ye must be hoping for a very lenient inspector! :D

    Well it's this here.
    poqnhNpm.jpg

    But it has to be moved back into the field about 1 1/2 foot. That should be grand!


  • Closed Accounts Posts: 20,621 ✭✭✭✭Buford T. Justice XIX


    Quadruplet calves born in Canada.:eek:

    http://www.cbc.ca/news/canada/saskatchewan/cow-gives-birth-to-quadruplets-1.3481156

    I've never come across triplets not to mind quads.


  • Registered Users, Registered Users 2 Posts: 4,035 ✭✭✭Odelay


    Quadruplet calves born in Canada.:eek:

    http://www.cbc.ca/news/canada/saskatchewan/cow-gives-birth-to-quadruplets-1.3481156

    I've never come across triplets not to mind quads.

    it's been done better in limerick, one cow with five calves


    http://www.limerickleader.ie/news/business-news/142659/Limerick-home-to-most-fertile-cow.html



    16 calves in just four calvings, nice lad Ger is too.


  • Advertisement
  • Registered Users, Registered Users 2, Paid Member Posts: 4,397 ✭✭✭davidk1394


    Second c.section in 2 nights... tisn't easy


This discussion has been closed.
Advertisement