Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Do eircom support PhyR / G.INP?

  • 11-05-2015 12:44AM
    #1
    yuloni
    Registered Users, Registered Users 2 Posts: 2,040 ✭✭✭


    This post has been deleted.


Comments

  • #2
    Nonoperational
    Registered Users, Registered Users 2 Posts: 7,401 ✭✭✭Nonoperational


    G.INP is definitely enabled. Made no real difference but since its implementation the SNR target has increased from 6 to 10 for me so I actually connect slower.


  • #3
    ED E
    Registered Users, Registered Users 2 Posts: 36,094 ✭✭✭✭ED E


    They're using G.IMP with 29 symbols in one direction and 30 in the other.

    PhyR I don't know, but considering Huawei make the DSLAMs and CPE and are good at their R&D I wouldn't be surprised if its something they're looking at.


  • #4
    notahappycamper
    Registered Users, Registered Users 2 Posts: 2,161 ✭✭✭notahappycamper


    Nonoperational wrote: »
    G.INP is definitely enabled. Made no real difference but since its implementation the SNR target has increased from 6 to 10 for me so I actually connect slower.

    This is interesting- was it only enabled recently i.e. in the past few months? As I was syncing at 50MB downstream at a 6dB SNR with no drops but since late Feb/early March I've had to get the speed dropped to have it not disconnect.


  • #5
    Nonoperational
    Registered Users, Registered Users 2 Posts: 7,401 ✭✭✭Nonoperational


    It's about a year I'd say now. I was syncing rock solid at 50Mbit and 6dB. No CRC errors no drops. When G.INP was enabled my target SNR went to 10 and I sync around 45Mbit.


  • #6
    yuloni
    Registered Users, Registered Users 2 Posts: 2,040 ✭✭✭yuloni


    This post has been deleted.


  • Advertisement
  • #7
    PeadarB
    Registered Users, Registered Users 2 Posts: 364 ✭✭PeadarB


    yuloni wrote: »
    This post has been deleted.
    Mine gives the following through the F 1000 Configurator (via Chrome) Network Setting > Broadband > Advanced

    xDSL setup
    ADSL over PTM : Disable
    Annex M : Enable
    PhyR US : Disable
    PhyR DS : Enable
    SRA : Enable

    G.inp is enabled where 100/20 is available from a cab.


  • #8
    notahappycamper
    Registered Users, Registered Users 2 Posts: 2,161 ✭✭✭notahappycamper


    PeadarB wrote: »
    Mine gives the following through the F 1000 Configurator (via Chrome) Network Setting > Broadband > Advanced

    xDSL setup
    ADSL over PTM : Disable
    Annex M : Enable
    PhyR US : Disable
    PhyR DS : Enable
    SRA : Enable


    G.inp is enabled where 100/20 is available from a cab.

    Do you know how to check same on the Vodafone router HG 658c?


  • #9
    yuloni
    Registered Users, Registered Users 2 Posts: 2,040 ✭✭✭yuloni


    This post has been deleted.


  • #10
    Nonoperational
    Registered Users, Registered Users 2 Posts: 7,401 ✭✭✭Nonoperational


    You can check a lot of things on the HG by altering the HTML code in the browser.


  • #11
    yuloni
    Registered Users, Registered Users 2 Posts: 2,040 ✭✭✭yuloni


    This post has been deleted.


  • Advertisement
Advertisement