suggest a good mitre box and saw for 45 degree cuts

Jimmy_M · 10-02-2015 12:38PM #1

I've to do a pile of architrave in my house (both sides of 7 doors).

I've an electric chop saw (lidl job). Its not accurate. Tried calibrating it but the real problem is no matter what angle you turn the plate to, there seem to be a little bit of play in the arm meaning the cut can go off no matter what.

So.... im thinking i might cut them manually.
Can you recommend a good mitre box or saw or guide rail or even a good technique for the job.

I'm thinking i might paint the architrave white anyway but i appreciate a nice neat 45 degree join and hate using filler.
Id be willing to spend about 50 or 60 quid.

Cheers

Calahonda52 · 10-02-2015 03:06PM

Any box will do as long as u have the right saw, say a tenon saw with a fine cut and no set on the blade.
Th trick is to have everything clamped up and level and tight and that the saw can cut through the piece without the stiffening back preventing the blade from cutting all the way down, putting a waste piece underneath will help.
Obviously the deeper and wider the box and the deeper the blade the better.
Stanley make a decent one

monkeynuz · 11-02-2015 09:15AM

Jimmy_M wrote: »

I've to do a pile of architrave in my house (both sides of 7 doors).

I've an electric chop saw (lidl job). Its not accurate. Tried calibrating it but the real problem is no matter what angle you turn the plate to, there seem to be a little bit of play in the arm meaning the cut can go off no matter what.

So.... im thinking i might cut them manually.
Can you recommend a good mitre box or saw or guide rail or even a good technique for the job.

I'm thinking i might paint the architrave white anyway but i appreciate a nice neat 45 degree join and hate using filler.
Id be willing to spend about 50 or 60 quid.

Cheers

Nobex mitre saws are excellent but might not fit with your budget.

Jimmy_M · 11-02-2015 10:35AM

Yeah they look the business alright. but i think id be half way to a decent electric one for that price (just did a quick google - 196 euro on handyhardware.ie)

Cheers for the replies - think ill go with a decent stanley box and a good tenon saw (dont have one at all) - ill find use for them again for sure.

Miname · 15-02-2015 03:35PM

Metabo have a saw on special at the moment for e160. Not a bad saw and should last a lifetime if minded. The problem with Aldi stuff is the bush ions and bearings are dirt and they won't hold through.

recipio · 15-02-2015 06:48PM

Axminster have a basic Nobex saw for £41.95.
They have a fine blade so very little chance of spelching. If you do buy a power saw its worth fitting a false fence to get very clean cuts.

suggest a good mitre box and saw for 45 degree cuts

Comments