Labour Saving and General Guntering

Nekarsulm · 06-02-2015 04:31PM

So I "acquired" this advertising hoarding a few years ago..

GY A1 · 06-02-2015 04:36PM

Nekarsulm wrote: »

And after a few hours, and the outrageous expenditure of €12,

thats a pic of man and child :P

Kovu · 06-02-2015 04:36PM

Nekarsulm wrote: »

And after a few hours, and the outrageous expenditure of €12,

Methinks your pic link is a bit....off. :pac:

Nekarsulm · 06-02-2015 04:49PM

So, we will try again!

Avns1s · 06-02-2015 04:52PM

Nekarsulm wrote: »

So, we will try again!

You made a quad out of it!! Class job too!!

:):D

GY A1 · 06-02-2015 05:10PM

Nekarsulm wrote: »

So, we will try again!

Nice job

Reggie. · 06-02-2015 05:16PM

Good job as always nek

kevthegaff · 06-02-2015 06:42PM

Reggie. wrote: »

Would they need to be plastered

they seem grand so far reggie maybe around where the gate closes eventually

Bullocks · 06-02-2015 06:57PM

kevthegaff wrote: »

they seem grand so far reggie maybe around where the gate closes eventually

Have you wh calves coming ? I could do a swap on labour for them !

kevthegaff · 06-02-2015 07:58PM

Bullocks wrote: »

Have you wh calves coming ? I could do a swap on labour for them !

Ì have blacks, have a guy working on that basis. Where are you located?

Bullocks · 07-02-2015 11:06AM

kevthegaff wrote: »

Ì have blacks, have a guy working on that basis. Where are you located?

Galway , I'd feel robbed doing it of course !

Muckit · 07-02-2015 06:40PM

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

dh1985 · 07-02-2015 06:49PM

Muckit wrote: »

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

Those are for drilling around corners. Fierce handy

Bullocks · 07-02-2015 07:09PM

Muckit wrote: »

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

Does it take you long to get the hole started with them ?

Connemara Farmer · 07-02-2015 07:16PM

Muckit wrote: »

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

Little blue pill time.

blue5000 · 07-02-2015 07:22PM

Muckit wrote: »

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

What size is that

onyerbikepat · 07-02-2015 07:23PM

Lads, be careful with those small 1mm cutting discs. Had one break again today. You really have to cut dead square with them and if any metal pinches on them, forget about it.
I worked with experienced fitters and they were almost terrified of grinders. Seen too many close shaves over the years.

Bullocks · 07-02-2015 07:38PM

onyerbikepat wrote: »

Lads, be careful with those small 1mm cutting discs. Had one break again today. You really have to cut dead square with them and if any metal pinches on them, forget about it.
I worked with experienced fitters and they were almost terrified of grinders. Seen too many close shaves over the years.

Some lads have zero cop on when it comes to grinders . I saw a lad during the week using one of the thin grinder disks cleaning a girder , it must have been bent an inch off centre the way he was lying on it . " great discs them " he said !

We had a safety audit during the week and your man told me that the fella he called to before us was plastering a small gable . He had 20' planks across two bandstands with two barrells ontop of that with 12' planks on them and the old milk crate ontop of that to get the peak :eek: . Told him he was 46 years in the buildings without an accident !

countryjimbo · 07-02-2015 08:33PM

Muckit wrote: »

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

Thanks for that, was considering getting them, but not now☺

Muckit · 07-02-2015 08:43PM

countryjimbo wrote: »

Thanks for that, was considering getting them, but not now☺

They WERE good, but they must have changed the quality of the material going into them in the last while.

J DEERE · 07-02-2015 09:06PM

onyerbikepat wrote: »

Lads, be careful with those small 1mm cutting discs. Had one break again today. You really have to cut dead square with them and if any metal pinches on them, forget about it.
I worked with experienced fitters and they were almost terrified of grinders. Seen too many close shaves over the years.

Use grinders a good bit in work, big difference in cheap discs and good ones. For the sake of a euro or two. I've had the cheap ones break during use and hit me in the face and arms

Brown Podzol · 07-02-2015 09:36PM

Connemara Farmer wrote: »

Little blue pill time.

'Twas the preasure behind it.

foxy farmer · 07-02-2015 10:17PM

Brown Podzol wrote: »

'Twas the preasure behind it.

I'd say they've confused HSS (high speed steel) with high speed sh1te!!!

kevthegaff · 07-02-2015 10:45PM

Muckit wrote: »

The boxes of drill bits in Lidl are now unbelievable quality. They can do things l've never seen any other drill bits do before! !

are they not made from solid gold:-D

kevthegaff · 07-02-2015 10:48PM

This is my fav thread?Any pics of lads worksheds. done a job on mine moved from old to new shed.

Reggie. · 07-02-2015 10:50PM

kevthegaff wrote: »

This is my fav thread?Any pics of lads worksheds. done a job on mine moved from old to new shed.

You first

kevthegaff · 07-02-2015 10:53PM

Better go out and take a photo!

Reggie. · 07-02-2015 11:06PM

kevthegaff wrote: »

Better go out and take a photo!

Wrap up

kevthegaff · 07-02-2015 11:35PM

Here

Nekarsulm · 07-02-2015 11:42PM

That's disturbingly tidy.

you know what they say "a clean shed is the sign of a sick mind"

Labour Saving and General Guntering

Comments