Extend one analogue line over WiFi,two buildings

rolion · 27-01-2015 12:37AM #1

Hello,

Given a standard Ethernet network, one phone extension and two buildings.
How to / What do I need to extend that analogue extension, over the Wi-Fi on to another building ?

Thanks in advance
Regards

yuloni · 27-01-2015 12:49AM

This post has been deleted.

rolion · 27-01-2015 12:52AM

Thanks.

I have Building1 Ethernet and an analogue extension.
I have Building2 just Ethernet (connection to B1 over Wi-Fi)
B1 to B2 I have a wireless link bridged.

I would like to "move" / "extend" that analogue extension over, from B1 on to B2.

Thanks again...

gctest50 · 27-01-2015 01:07AM

this kinda* thing should work away :

http://www.amazon.com/Cisco-SPA3102-Voice-Gateway-Router/dp/B000FKP55U

http://www.amazon.com/Cisco-SPA112-Port-Phone-Adapter/dp/B00684PN54/ref=pd_cp_e_0/179-6917432-7716342

one on each end ,

make the "line" side auto-answer and "dial-up" the unit on the far side of the wifi link

you'll need to prioritise the voice traffic with something - or it'll sound like a badger in a bin

kinda* = maybe not those exact ones

/i'll put a bit more into it later if no-one else is along

Extend one analogue line over WiFi,two buildings

Comments