Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Is BIG a standardised format for Hard Drives

  • 18-07-2014 01:14PM
    #1
    Laphroaig52
    Registered Users, Registered Users 2 Posts: 1,147 ✭✭✭


    I have a dual bay USB enclosure with two 3.5" SATA (1TB & 500GB) drives configured as BIG. This is the 'puter sees them as one big 1.5" Drive. It's a noisy old enclosure and I only used it for back ups and leave it switched off most of the time.

    Anyway, it looks like the enclosure has failed - powers on but the drives don't spin up - and I want to replace it.

    If I get a new enclosure that supports BIG, will it just be a case of swapping the drives over? Or does each enclosure have its own ideas about how the BIG format should look?

    Alternatively, if I just want to pull the data off these drives, if I pop them into a single bay enclosure individually, will they be readable?


Comments

  • #2
    maki
    Registered Users, Registered Users 2 Posts: 774 ✭✭✭maki


    BIG is just a spanned volume. I don't know of any hardware implementations, but it's supported natively in Windows anyway.

    So, yes, you should be able to just pop them in a new enclosure.

    Just be aware that, like RAID0, you have no redundancy with a spanned volume. If one drive dies you lose data on both. One drive will not work without the other.

    Honestly, a spanned volume has absolutely no benefits apart from having one less drive letter to worry about. Really not worth the risk.


Advertisement
Advertisement