Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Semi Solid Timber floor warpped

  • 01-07-2014 03:54PM
    #1
    Registered Users, Registered Users 2 Posts: 2


    Need advice please. I bought a new oak semi solid timber floor. Two weeks ago the floor was delivered and one board was taken out of the top packet to see the colouring. This board was then left flat ontop of the packs, went to lay the floor after two weeks of it acclimatising and this board that had been taken out of the pack was banana shaped.

    I took out another board which was only 1.5 foot in length, this was also banana shaped. Opened the next packed down and the same thing the boards coming out of the packets are warped.

    The carpenter has refused to lay them as the moisture content of the boards is at 14%. There has been no heat on in the house so drying them out too quick is not the issue. I can understand why he won't lay them and I'm glad he won't as they wont even slot together. He was supposed to lay it as a floating floor.

    Can anyone explain why this has happened the boards?

    The shop rep is trying to fob us off saying that this can happen if they are stored for too long before being laid. I've put down semi solid floors in other rooms before and they were left for a over a month and this didn't happen.


Comments

  • Registered Users, Registered Users 2 Posts: 2 dee1234


    Also the moisture content of the boards after 2 weeks is reading 14% if that is of any help, this is not a new house either its almost 40 years old


  • Registered Users, Registered Users 2 Posts: 1 The Red Haired Lady


    Hi
    The moisture content of the wood was wrong before you got it from the shop
    I had the same problem one time with a shop.
    Go back to the shop and demand a refund /replacement, failing that there is a shop out in county Limerick that we have used recently and found them great, don't remember what the name of shop but the mans name is Pat and his contact is 0876761272


Advertisement