Ferguson Ariva 250

Thargor · 30-12-2012 02:58PM

Also what does the 5/6 thing at the end mean? I see no option to enter that...

Thargor · 30-12-2012 03:06PM

Sorry for all the posts but I cant figure this out...

If one of you saw that a channel had changed frequency and you had to sit down from scratch and change it, what would you do?

Nothing I try works and there's nothing in the manual. BBC 4 is channel 8 in my list. I go to channel 8, I go into menu, I go into TP List, I scroll down to 8 and change it to 10773 mhz, H, 22000 and save. Then I press the blue button to do a search and nothing happens, it just says no channels found.

corglass · 30-12-2012 09:22PM

corglass wrote: »

Guys,

Is is possible to access media stored on my local network?

I can only access files on a USB stick. I cannot see the option for files on my local network.

thanks

Anyone?

STB · 30-12-2012 09:56PM

Thargor wrote: »

Sorry for all the posts but I cant figure this out...

If one of you saw that a channel had changed frequency and you had to sit down from scratch and change it, what would you do?

Nothing I try works and there's nothing in the manual. BBC 4 is channel 8 in my list. I go to channel 8, I go into menu, I go into TP List, I scroll down to 8 and change it to 10773 mhz, H, 22000 and save. Then I press the blue button to do a search and nothing happens, it just says no channels found.

You must not have updated your box in some time. BBCs moved around at end November.

You can only scan for BBC4 and BBC3 after 7pm in order to add to your list.

corglass wrote: »

Anyone?

The Internet based options are hardcoded into the proprietary Ali Software which is closed source. You cannot FTP into them. You are looking at a linux box if you need to do this.

Squatter · 04-01-2013 01:24AM

Well my new Ferguson Ariva 250 combo box arrived this afternoon in its shiny red box and I immediately disconnected the ageing Skybox and set it up.

I've been playing with it all evening and it looks like a grand bit of kit, but, try as I might, I can't get S4C on it

.

Am I missing something obvious, or is S4C only available on a Sky box, please?

STB · 04-01-2013 11:49PM

Squatter wrote: »

Well my new Ferguson Ariva 250 combo box arrived this afternoon in its shiny red box and I immediately disconnected the ageing Skybox and set it up.

I've been playing with it all evening and it looks like a grand bit of kit, but, try as I might, I can't get S4C on it .

Am I missing something obvious, or is S4C only available on a Sky box, please?

There is an option to manually scan channels rather than having to rescan the whole of Astra2 satellite again. Its called TP Scan on the Ariva. Go into that and enter the following values.

Freq: 12051
Symbole Rate: 27500
Polarisation: V

Click down to Search and it should find it and add to the bottom of your Astra 2 list. You can then add it to your favourite channel list.

12051 V

anxie · 09-01-2013 10:12PM

Hi all.
On my 250 channel list I have RTÉ 1 as 1 RTE 2 as 2 and the main UK channels next...
Sometimes the Irish channels disappear and BBC is suddenly channel 1
As mentioned earlier in this thread this is because the source has been amended and it is not looking at the aerial feed and it can be corrected by telling the STB to look at all sources
# Menu > Edit Channels > TV Channel List > (select Astra 1, Astra 2A, DVB-T [All Channels] )

However, I have no idea why this happens from time to time and if there is a quicker way to instruct the STB to view all sources (All channels),
On the 150 remote there was a button on the first row which achieved this.

Anyway, the reason it is such a pain is that it's not happening to me, but to my inlaws and I get 3 - 4 calls a week and you've no idea how long it takes to go through the few steps marked '#' above in order to fix it over the phone

anyone know how to disable whatever shortcut they keep hitting, or any quicker way to reset it to All Channels?

anxie

Tony · 09-01-2013 10:47PM

anxie wrote: »

anyone know how to disable whatever shortcut they keep hitting, or any quicker way to reset it to All Channels?

anxie

Press the ok button to bring up the channel list and then use the right arrow button (next to the ok button) to change between lists. Astra 1 should not be selected in the satellite list unless they actually have a dish for viewing Astra 1 .

Colmos85 · 10-01-2013 01:22AM

Hey, Been months since I was on here and cant read through 20 pages but.. Does anyone know if there is restrictions for the HDD size for this box? I got a 2TB HDD, USB 3.0 and it doesn't even recognise it when its plugged in? maybe cause its USB 3.0?

STB · 10-01-2013 01:35AM

Colmos85 wrote: »

Hey, Been months since I was on here and cant read through 20 pages but.. Does anyone know if there is restrictions for the HDD size for this box? I got a 2TB HDD, USB 3.0 and it doesn't even recognise it when its plugged in? maybe cause its USB 3.0?

USB3 Drives are fine. I use one.

You might want to partition it to 750 and 1250. Did you try the front USB port instead of the back ? I am guessing that this 2TB drive doesnt have its own power supply.

Colmos85 · 10-01-2013 02:14AM

Ya ill make a partition on it. Im sure I have some software to do this and not lose data.. been a while though

Just going through the manual and see if I can find anything about it too. Will post results tomorrow.

STB wrote: »

USB3 Drives are fine. I use one.

You might want to partition it to 750 and 1250. Did you try the front USB port instead of the back ? I am guessing that this 2TB drive doesnt have its own power supply.

Colmos85 · 10-01-2013 02:34AM

By the way its an external 3.5" with its own power supply. Just checked the manual for the 250 and it states :
"The receiver supports all types of HDD in housings that are equipped with an independent power supply. The sole condition is that the hard disk has to have a single basic partition that is formatted in NTFS (recommended) or FAT32 system."

So I might try another 2TB Hard Disk and see if it recognises it first.

STB · 10-01-2013 02:56AM

Colmos85 wrote: »

By the way its an external 3.5" with its own power supply. Just checked the manual for the 250 and it states :
"The receiver supports all types of HDD in housings that are equipped with an independent power supply. The sole condition is that the hard disk has to have a single basic partition that is formatted in NTFS (recommended) or FAT32 system."

So I might try another 2TB Hard Disk and see if it recognises it first.

Yes but I have it in my head that the Ferguson has an issue with anything over 750g.

As you know hardware and usb device recognition can be iffy. Example, my Samsung TV recognises one USB3 drive but not the other!

anxie · 10-01-2013 05:01PM

Tony wrote: »

Press the ok button to bring up the channel list and then use the right arrow button (next to the ok button) to change between lists. Astra 1 should not be selected in the satellite list unless they actually have a dish for viewing Astra 1 .

Thanks Tony, I think that this must also be the way he keeps changing the source list also. cheers!

Thargor · 10-01-2013 05:13PM

STB wrote: »

USB3 Drives are fine. I use one.

You might want to partition it to 750 and 1250. Did you try the front USB port instead of the back ? I am guessing that this 2TB drive doesnt have its own power supply.

Theres a front USB port?

Thargor · 10-01-2013 05:15PM

STB wrote: »

You must not have updated your box in some time. BBCs moved around at end November.

You can only scan for BBC4 and BBC3 after 7pm in order to add to your list.

Never thanked you for that STB, Ill try next time Im home, doesnt explain why BBC News said there was nothing there though, thats 24/7.

dodzy · 10-01-2013 08:20PM

Thargor wrote: »

Theres a front USB port?

Yes, front right hand side. The flap with "ARIVA 250 Combo" logo opens down from the top. The USB port is inside, to the left of the CAM slot.

I'd be surprised if it makes a difference in your case though. I hate utilizing the front USB. Untidy looking. It was the same on the Ariva 120. But that was easily relocated to the rear with a few small tools

Colmos85 · 10-01-2013 11:13PM

I tried another 2TB drive and it wont recognise it either. Not looking good for big drives now

Disappointed about that but nothing I can do. Fortunately I have a 500GB drive I can use.

STB wrote: »

Yes but I have it in my head that the Ferguson has an issue with anything over 750g.

As you know hardware and usb device recognition can be iffy. Example, my Samsung TV recognises one USB3 drive but not the other!

Thargor · 10-01-2013 11:19PM

dodzy wrote: »

Yes, front right hand side. The flap with "ARIVA 250 Combo" logo opens down from the top. The USB port is inside, to the left of the CAM slot.

I'd be surprised if it makes a difference in your case though. I hate utilizing the front USB. Untidy looking. It was the same on the Ariva 120. But that was easily relocated to the rear with a few small tools

Handy for dragging a film off the laptop and just shoving it in for 2 hours though, definitely better than unplugging the recording one and plugging it back in afterwards like we were doing!

dodzy · 11-01-2013 12:48AM

Colmos85 wrote: »

I tried another 2TB drive and it wont recognise it either. Not looking good for big drives now Disappointed about that but nothing I can do. Fortunately I have a 500GB drive I can use.

If thats the case, its not the end of the world really. A 500gig drive will record about 250hrs of SD TV. Full HD material would result in approx 85hrs on the same drive.

Or maybe your problem is that you want to use the Ariva as a "go between" to link an ext HDD already populated with content to play on a TV with no multimedia playback facility ?

Colmos85 · 11-01-2013 01:24AM

Yes Im using it as a "go between", have over 1TB data but will have to pick and choose fewer files for the 500GB drive now.

dodzy wrote: »

If thats the case, its not the end of the world really. A 500gig drive will record about 250hrs of SD TV. Full HD material would result in approx 85hrs on the same drive.

Or maybe your problem is that you want to use the Ariva as a "go between" to link an ext HDD already populated with content to play on a TV with no multimedia playback facility ?

Thargor · 12-01-2013 08:57PM

Right Im back down at home and Ive tried 6 times to get BBC news to come back and same for BBC4, can someone please just tell me how to do it, BBC4 is channel 8 on my box and BBC news is channel 16.

I go to channel 8, I go into menu, I go into TP List, I scroll down to 8 and change it to 10773 mhz, H, 22000 and save. Then I press the blue button to do a search then it does a scan and just exits back out to BBC Alba which is what appeared in BBC4s slot when the frequency changed, can someone please say what they do to an Ariva 250 when they need to change the frequency of a channel?

iba · 12-01-2013 09:01PM

Thargor wrote: »

Right Im back down at home and Ive tried 6 times to get BBC news to come back and same for BBC4, can someone please just tell me how to do it, BBC4 is channel 8 on my box and BBC news is channel 16.

I go to channel 8, I go into menu, I go into TP List, I scroll down to 8 and change it to 10773 mhz, H, 22000 and save. Then I press the blue button to do a search then it does a scan and just exits back out to BBC Alba which is what appeared in BBC4s slot when the frequency changed, can someone please say what they do to an Ariva 250 when they need to change the frequency of a channel?

Ignore this channell 8

go to astra sat and add in the new transponder

Thargor · 12-01-2013 09:09PM

How do you mean go to Astra sat? Are we still in TP List here or somewhere else?

iba · 12-01-2013 09:12PM

Thargor wrote: »

How do you mean go to Astra sat? Are we still in TP List here or somewhere else?

Go to menu

Satelite list

Then put a love heart beside Astra 28.2

Avns1s · 12-01-2013 09:16PM

Press menu> goto to "installation".

Highlight "TP List"

Make sure you have selected Astra 2a at the top.

Press the green button, to "Add Transponder"

Freq 10818, Symbol rate 22000, Polarisation v,

Then "Search"

You will then have to add the channels found, which will be added to the end of the Astra 2A list, to your favourites.

Thargor · 12-01-2013 09:21PM

Okay Ill give it a try thanks.

dubmark74 · 13-01-2013 06:39PM

Hi, i'm looking for some help connecting my Ariva 250 to the Internet. I cannot get it connected either using cable or wireless. I had V1.19 and have upgraded to V1.21 but that does not work either. I tried switching DHCP ON but it says 'setting DHCP, press exit to cancel...', after a few minutes it just defaults to off. I assume DHCP has to be on. Am i missing something here. Any help appreciated.

iba · 13-01-2013 06:50PM

dubmark74 wrote: »

Hi, i'm looking for some help connecting my Ariva 250 to the Internet. I cannot get it connected either using cable or wireless. I had V1.19 and have upgraded to V1.21 but that does not work either. I tried switching DHCP ON but it says 'setting DHCP, press exit to cancel...', after a few minutes it just defaults to off. I assume DHCP has to be on. Am i missing something here. Any help appreciated.

I dont know the answer to your question, but I can confirm that my DHCP is on

In addition, I am connected by cable - as far as I know, the 250 does not have wireless capabilities unless you use a wi-fi dongle

dubmark74 · 13-01-2013 06:52PM

iba wrote: »

I dont know the answer to your question, but I can confirm that my DHCP is on

In addition, I am connected by cable

Thanks, IBA. Does anyone know why the DHCP will not switch on. It was the same with the previous firmware version.

Ferguson Ariva 250

Comments