Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

Ferguson Ariva 250

1…2324262829…79

Comments

  • #752
    Tony
    Registered Users, Registered Users 2 Posts: 11,362 ✭✭✭✭Tony


    Thats very cool thanks for the hard work.


    Ph3arTh35k1llz wrote: »
    cheers lads the newer dated software fixes the divx issues.

    i have updated your channel lists into the newer software (Thanks Tony for the info on how to do it)

    File name: STB_A250Combo_20121112_V1.20B6.abs
    Download link: http://www.mediafire.com/file/5cuq6kuc6h6sb3h

    File name: Tony_A250Combo_20121112_V1.20B6.abs
    Download link: http://www.mediafire.com/file/4l8hxqqbajhunzq

    thanks again.

    Owner: satellite.ie



  • #753
    iba
    Registered Users, Registered Users 2 Posts: 2,642 ✭✭✭iba


    Ph3arTh35k1llz wrote: »
    cheers lads the newer dated software fixes the divx issues.

    i have updated your channel lists into the newer software (Thanks Tony for the info on how to do it)

    File name: STB_A250Combo_20121112_V1.20B6.abs
    Download link: http://www.mediafire.com/file/5cuq6kuc6h6sb3h

    File name: Tony_A250Combo_20121112_V1.20B6.abs
    Download link: http://www.mediafire.com/file/4l8hxqqbajhunzq

    thanks again.

    Ph3arTh35k1llz,

    Whats the difference in these two uploads please?

    Iba


  • #754
    iba
    Registered Users, Registered Users 2 Posts: 2,642 ✭✭✭iba


    Is this really a new update since the one that was posted on 4/5 November?

    Why would they call it the same name?

    Link here anyway - I hadnt noticed it at all

    http://www.ferguson-digital.eu/en/download/HD-Satellite-Receivers/Ariva-250-Combo/


  • #755
    iba
    Registered Users, Registered Users 2 Posts: 2,642 ✭✭✭iba


    Tony wrote: »
    The original list took quite a bit of time and I was hoping that others would do terrestrial transmitter specific lists from around the country by adding on terrestrial channels but unfortunately STB and one or two others are the only ones that have pitched in so far .

    Id upload mine, but really there is no point cause I have totally different stations on it that the normal Astra 28.2 User would have


  • #756
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    and embed it in your firmware and channel list (as mentioned previously).

    2 bits of software.

    Read the instructions or you will brick your box (I will not be held responsible)!

    Works on Ariva 120/220 and Ariva 150/250 range.

    Example - Customised Background for Radio mode
    226545.jpg


  • Advertisement
  • #757
    king2
    Registered Users, Registered Users 2 Posts: 407 ✭✭king2


    Does the lipsync issue still exist on the new firmware?


  • #758
    Tony
    Registered Users, Registered Users 2 Posts: 11,362 ✭✭✭✭Tony


    As far as I'm aware its not a box specific issue so firmware will have no bearing on it . If it was firmware related then everyone with a 250 would have the same problem.

    king2 wrote: »
    Does the lipsync issue still exist on the new firmware?

    Owner: satellite.ie



  • #759
    O'Prez
    Registered Users, Registered Users 2 Posts: 676 ✭✭✭O'Prez


    STB wrote: »
    and embed it in your firmware and channel list (as mentioned previously).

    2 bits of software.

    Read the instructions or you will brick your box (I will not be held responsible)!

    Works on Ariva 120/220 and Ariva 150/250 range.

    Example - Customised Background for Radio mode
    226545.jpg

    Deadly. Thanks STB.


  • #760
    mcglough
    Registered Users, Registered Users 2 Posts: 4 ✭mcglough


    Sorry if this has been asked and answered, I have not been able to find an answer. In a nutshell, I am looking for a recording device for the 250 - preferably a USB key or flash memory as I don't really want the extra device always powered on. If someone has gotten one that works well, please can you mention here. If that is really a non-flyer, I would be interested in any recommendations for a HDD that is quiet and is smart enough to power down and back on again when the 250 wants it to.

    Thanks.
    mcglough wrote: »
    Assume you meant 256GB? In any case, what exact device did you use? I want to do the same but don't want to spash out on one unless I am pretty certain it works with the 250. I would also be interested to know where you bought it and how much you spent?

    Thanks.


  • #761
    king2
    Registered Users, Registered Users 2 Posts: 407 ✭✭king2


    http://www.officepad.co.uk/stationery/kin14802.shtml

    I use this one and it works well. Expensive though, I got a present of it a few years back.The write speed should be at least 10mb/s to work with the 250 according to the manual, If I was buying one I would go for something cheaper with this write speed.


  • Advertisement
  • #762
    Hagrid101
    Registered Users, Registered Users 2 Posts: 57 ✭✭Hagrid101


    Having an absolute nightmare here!

    Did an upgrade on the box, got the internet working, got irish channels, now the thing wont turn on for more than 2 seconds without turning off and illegible lights on the front of the box!

    is it possible to hard reset the box or something back to factory condition?

    HELP!


  • #763
    Tony
    Registered Users, Registered Users 2 Posts: 11,362 ✭✭✭✭Tony


    try disconnecting the dish cable and see will box power up, use the switch on the back of the box to do this.

    Hagrid101 wrote: »
    Having an absolute nightmare here!

    Did an upgrade on the box, got the internet working, got irish channels, now the thing wont turn on for more than 2 seconds without turning off and illegible lights on the front of the box!

    is it possible to hard reset the box or something back to factory condition?

    HELP!

    Owner: satellite.ie



  • #764
    Nowso
    Moderators, Sports Moderators Posts: 6,182 Mod ✭✭✭✭Nowso


    Hagrid101 wrote: »
    Having an absolute nightmare here!

    Did an upgrade on the box, got the internet working, got irish channels, now the thing wont turn on for more than 2 seconds without turning off and illegible lights on the front of the box!

    is it possible to hard reset the box or something back to factory condition?

    HELP!


    u need the rs232 cable like i will have to do also in the meantime if when u click on push channel up to change channel before it goes back off it does stay on i found , that helped me before mine bricked it


  • #765
    Tony
    Registered Users, Registered Users 2 Posts: 11,362 ✭✭✭✭Tony


    If you can get it to stay on there's a factory setting in the menu

    Owner: satellite.ie



  • #766
    Hagrid101
    Registered Users, Registered Users 2 Posts: 57 ✭✭Hagrid101


    i tried that - removing the antenna cables at the back, it didnt work. the display on the box shows different lines then it goes back into standby.

    tried the pressing up channel thing too, still shut off to standby.

    maybe the rs232 cable solution is the best thing to do? is that the failsafe/last resort solution?

    Can i get that cable in a b and q or pcworld or any of those?

    Will it be easy enough done?

    I feel the box may in fact be 'bricked'...


  • #767
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    Hagrid101 wrote: »
    i tried that - removing the antenna cables at the back, it didnt work. the display on the box shows different lines then it goes back into standby.

    tried the pressing up channel thing too, still shut off to standby.

    maybe the rs232 cable solution is the best thing to do? is that the failsafe/last resort solution?

    Can i get that cable in a b and q or pcworld or any of those?

    Will it be easy enough done?

    I feel the box may in fact be 'bricked'...

    Bricked is only temporary. These boxes cannot be killed.

    What did you do to make this happen. The more honest you are the more we can help you. :)

    What firmware did you use ? And What was the source of it.


  • #768
    Hagrid101
    Registered Users, Registered Users 2 Posts: 57 ✭✭Hagrid101


    i found some firmware on this post, like probably near the start of the 52 pages, to do with channel lists, quick read, found an underlined link, i think it was posted by yourself or tony, downloaded onto a usb, plugged it in, 'upgrade from usb', the thing said "dont turn off" up to 100 percent, it turned off, then turned on with nothing legible on the display thing, showed chuck norris for about 3 seconds in some show, then cut off. then the shhh one tee hit the fan. so, it was all honest, in that i did upgrade, but now its gone awol.

    hashtag- DIYfail.

    firmware - no idea, source - somewhere along this string of posts... oh, found it - http://www.boards.ie/vbulletin/showthread.php?t=2056711036&page=6


  • #769
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    Hagrid101 wrote: »
    i found some firmware on this post, like probably near the start of the 52 pages, to do with channel lists, quick read, found an underlined link, i think it was posted by yourself or tony, downloaded onto a usb, plugged it in, 'upgrade from usb', the thing said "dont turn off" up to 100 percent, it turned off, then turned on with nothing legible on the display thing, showed chuck norris for about 3 seconds in some show, then cut off. then the shhh one tee hit the fan. so, it was all honest, in that i did upgrade, but now its gone awol.

    hashtag- DIYfail.

    firmware - no idea, source - somewhere along this string of posts... oh, found it - http://www.boards.ie/vbulletin/showthread.php?t=2056711036&page=6

    Your box. What model is it ? It will say it on the front flap on the box.


  • #770
    Hagrid101
    Registered Users, Registered Users 2 Posts: 57 ✭✭Hagrid101


    ferguson ariva 150 combo sir.


  • #771
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    Hagrid101 wrote: »
    ferguson ariva 150 combo sir.

    Thought so. Yes well this thread is for the Ariva 250 which is different model box which has different firmware. So now that the cause is established you need to.

    It will work and all will be fine again.


  • Advertisement
  • #772
    Hagrid101
    Registered Users, Registered Users 2 Posts: 57 ✭✭Hagrid101


    Ah, this is not good.

    Is it possible to get a usb converter to that null modem cable?


  • #773
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    Hagrid101 wrote: »
    Ah, this is not good.

    Is it possible to get a usb converter to that null modem cable?

    I know its not, but you are worrying too much!

    You must know someone with a PC ? Follow my instructions on the 150 thread, stick the software onto a USB stick and bring it to someone elses PC and connect the PC to the box. 2 minutes! (A PC repair shop might let you borrow one and a null modem cable in shop to do there and then).

    I have never seen a USB to Null modem cable that works.

    The Ariva 150/250/120 etc all have different firmwares and using one meant for another model unfortunately will brick your box albeit temporarily. Your not the first!


  • #774
    Nowso
    Moderators, Sports Moderators Posts: 6,182 Mod ✭✭✭✭Nowso


    i am waiting for a usb to rs232 to be delivered from ebay so will see how it goes


  • #775
    Hagrid101
    Registered Users, Registered Users 2 Posts: 57 ✭✭Hagrid101


    STB wrote: »
    I know its not, but you are worrying too much!

    You must know someone with a PC ? Follow my instructions on the 150 thread, stick the software onto a USB stick and bring it to someone elses PC and connect the PC to the box. 2 minutes! (A PC repair shop might let you borrow one and a null modem cable in shop to do there and then).

    I have never seen a USB to Null modem cable that works.

    The Ariva 150/250/120 etc all have different firmwares and using one meant for another model unfortunately will brick your box albeit temporarily. Your not the first!

    Ah yeah, not the end of the world! I'll get a cable and see how I get on. Thanks!


  • #776
    beezer9791
    Registered Users, Registered Users 2 Posts: 16 ✭beezer9791


    Hi guys,

    I wonder if u can help me. I have an ariva 250 but I'm having problems with the c line or logging in to be more specific. I put all my line details into ccam but it continuously gives me login failure. It's the very odd time I get a login success- and when I switch the box off and back on it won't automatically reconnect.
    I'm using the latest firmware that's out but have used the older one up to now and got on great ( with a different box however)

    Cheers


  • #777
    gg69me
    Registered Users, Registered Users 2 Posts: 39 ✭gg69me


    i am getting fair sick of this YOUPORN is gone again and i only had it back for about three weeks with the new firmware.....everything else is there so is it just me or has anybody else lost YOUPORN aswell .....I GIVE UP.....if i have to download even another updated firmware i dont think i will bother....what a joke


  • #778
    Thargor
    Registered Users, Registered Users 2 Posts: 18,251 ✭✭✭✭Thargor


    Does anyone else get an 'invalid input' error when they're trying to set the timer? Its like it doesn't like certain programmes or something, I cant figure it out.


  • #779
    O'Prez
    Registered Users, Registered Users 2 Posts: 676 ✭✭✭O'Prez


    Thargor wrote: »
    Does anyone else get an 'invalid input' error when they're trying to set the timer? Its like it doesn't like certain programmes or something, I cant figure it out.

    I got this when I mistakenly put in an end time instead of time duration. Maybe that's it?


  • #780
    Thargor
    Registered Users, Registered Users 2 Posts: 18,251 ✭✭✭✭Thargor


    No, Im not filling it in manually and I remember checking for that, its when you open the guide and hit green and all the details are already filled in. I dont understand it, 4 out of 5 times it works perfectly then it just decides it wont tape a certain programme.


  • Advertisement
  • #781
    O'Prez
    Registered Users, Registered Users 2 Posts: 676 ✭✭✭O'Prez


    Thargor wrote: »
    No, Im not filling it in manually and I remember checking for that, its when you open the guide and hit green and all the details are already filled in. I dont understand it, 4 out of 5 times it works perfectly then it just decides it wont tape a certain programme.

    Oh. Well mine won't record at all (from standby when I've set a timer) so I'm no help.


Advertisement