If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

help with question please

gallmatt · 2012-10-15 17:45:51

machine design mech eng being trying to do it all day :mad: A plate cam with a reciprocating knife edge follower is to be driven by a constant speed motor at 200 rpm. The follower is to start from a dwell, rise to a lift of 50mm. The maximum velocity of the follower during this lift is be 1200 mm/s. The follower then…

15-10-2012 06:45PM

#1

gallmatt

Registered Users, Registered Users 2 Posts: 30 ✭

Join Date: January 2012

Posts: 22

machine design mech eng
being trying to do it all day :mad:

A plate cam with a reciprocating knife edge follower is to be driven by a constant speed motor at 200 rpm. The follower is to start from a dwell, rise to a lift of 50mm. The maximum velocity of the follower during this lift is be 1200 mm/s. The follower then dwells for 0.1 seconds before returning, and dwelling for 0.05 seconds. Determine the specifications of the displacement diagram. Plot the displacement diagram and the first two derivatives with respect to cam rotation.

0

Comments

#2 16-10-2012 01:50PM

godtabh

Moderators, Science, Health & Environment Moderators Posts: 23,265 Mod ✭✭✭✭

Join Date: April 2005

Posts: 21064

I suggest you ask your fellow students/lecturer rather than get boards to do your home work.

0

This discussion has been closed.