Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

How to remove stock from G&G M4?

  • 06-10-2012 06:02PM
    #1
    Kashkai
    Closed Accounts Posts: 3,399 ✭✭✭


    I bought a new sling connector to fit next to the guns receiver as the rear stock sling mount is too far back and if I drop the gun to go for my pistol, the M4 is hanging down round my knees.

    I got the adjustable stock off, loosened the nut next to the receiver but that's as far as I got. I figure there's a screw inside the stock tube but I can't get at it as I can't get the rear cover off the stock tube.

    Any advice?


Comments

  • #2
    Inari
    Registered Users, Registered Users 2 Posts: 3,152 ✭✭✭Inari


    Remove the LE stock, and turn the gun upside down and you will see a small allen head screw at the end of the stock tube. Remove that screw, and pull the end cap off to get at the attachment screw. You need to use a long philips head screwdriver to remove that screw, and then the stock tube will just come right off :)


  • #3
    Kashkai
    Closed Accounts Posts: 3,399 ✭✭✭Kashkai


    Thanks Kev. Once the hex screw came out, I got the new sling attachment on in a minute. All fixed up now. :)


Advertisement