Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Sabertooth z77 mother powered wont turn on

  • 26-07-2012 03:05PM
    #1
    David2k9
    Registered Users, Registered Users 2 Posts: 3 ✭


    when i turn on the psu the green standby led turns on but when i press the power button nothing happens. i have tryed rebuild from scratch and made sure all wires are in the correct place any suggest is welcome.
    Tagged:


Comments

  • #2
    Skylinehead
    Registered Users, Registered Users 2 Posts: 11,690 ✭✭✭✭Skylinehead


    David2k9 wrote: »
    when i turn on the psu the green standby led turns on but when i press the power button nothing happens. i have tryed rebuild from scratch and made sure all wires are in the correct place any suggest is welcome.

    Is there a debug LED showing, or does it even get that far?


  • #3
    Eboggles
    Registered Users, Registered Users 2 Posts: 1,600 ✭✭✭Eboggles


    Try shorting the front panel pins instead of using a power switch.


  • #4
    David2k9
    Registered Users, Registered Users 2 Posts: 3 ✭David2k9


    it doesnt even get that far


  • #5
    David2k9
    Registered Users, Registered Users 2 Posts: 3 ✭David2k9


    how do i do that?


  • #6
    -( i )- Wicker
    Registered Users, Registered Users 2 Posts: 380 ✭✭-( i )- Wicker


    Open your motherboard manual and look under "System Panel Connector". Make a connection between the power and ground pins using a flathead screwdriver (its essentially the same as pushing the power button on your case).


  • Advertisement
Advertisement