Advertisement
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Windscreen Washer Blocked

  • 11-04-2012 08:30AM
    #1
    little lady
    Registered Users, Registered Users 2 Posts: 339 ✭✭


    Hi,

    I've had my car for several years but it seems the previous owner used fairy liquid in the windscreen washer and now they are blocked and won't work at all. It seems that some kind of residue has built up which is blocking the tubes from the inside.

    I was just wondering if anyone knows if there is a way to clear them??

    Thanks
    LL


Comments

  • #2
    tfitzgerald
    Registered Users, Registered Users 2 Posts: 2,290 ✭✭✭tfitzgerald


    Try using a needle on the nozzle . Twist it around a bit and it will probably free it out


  • #3
    listermint
    Registered Users, Registered Users 2, Paid Member Posts: 34,631 ✭✭✭✭listermint


    I would suggest that the issue may be in the bottom of the water resevouir, You might seek someone competent to remove it and clean the end out with a hose.

    There are certain cleaners that just make a cloopy goo in the end of the tank blocking the waters exit it also clogs up the micro pump and the impellers cant pass water.

    Alternatively as suggested above it may be the the nozzle heads a needle/pin can remove dirt from this.

    Also check the connections under the bumper to make sure they are not loose and just spraying water into the engine bay.


  • #4
    BrensBenz
    Registered Users, Registered Users 2 Posts: 1,292 ✭✭✭BrensBenz


    Yes, a needle usually cleared mine. Occasionally, I had to remove the nozzle unit, immerse it in warm water and blow through. You can also reset the squirt angle (technical term) with the needle.
    I found that the cheap windscreen washes, Fairy liquid, drops of vinegar, etc, turned to gel and blocked the nozzles so, now, I use Rainx washer-bottle additive from Mr. Halfords. It doesn't freeze in Irish winters and has "some" beading qualities in rain. No blockages since changing.


  • #5
    little lady
    Registered Users, Registered Users 2 Posts: 339 ✭✭little lady


    Hi,

    Thanks for the replies, I've already tried the needle\pin but it didn't work. I think the problem is from the inside, tubes blocked or something.

    I will bring it to some one and see if they can clean it.

    Cheers
    LL


  • #6
    colm_mcm
    Registered Users, Registered Users 2 Posts: 73,328 ✭✭✭✭colm_mcm


    Is the motor making noise when you pull the lever? If so, disconnecting the hose from under the bonnet and trying it will rule out the jet itself.


  • Advertisement
  • #7
    Backtowhite
    Registered Users, Registered Users 2 Posts: 29 ✭Backtowhite


    What car is it?

    Recently had this problem with a BMW E46 and the issue was the pump on the water bottle in the engine. It was clogged with dirt


  • #8
    kilianmanning
    Registered Users, Registered Users 2 Posts: 641 ✭✭✭kilianmanning


    Had this problem recently. An overnight soak in vinegar sorted it out. Could work for you especially if you use limey water in the water reservoir.


Advertisement
Advertisement