www.hobbyairsoft.ie (Cork)

Hey lads, was wondering if you could just ans me a quick question? I've got a KWA M4 S-System, and have recently put an element 6'' silencer on it. Love the look of it and not going to get rid of it! Now, to make the most of it was thinking of going putting an extended tightbore on it, raising the length from 394mm to 550mm so 156mm of a difference, now was thinking of going 6.01 madbull! Do you think this a crazy move or do I just have to re-think something. I know I need a certain amount of air in the cylinder to shoot out the bb and still have sufficient force as it leaves the barrel! Just want to know what you think.
This is my baby,

Was thinking of this barrel http://www.airsoftpost.com/product_info.php?products_id=33626 Tell me what you think?

maciek87 wrote: »

Sorry lads for late reply - still has some problems with my PC (bastard of a worm on it), hence I got my own one to the office :-)

Now:
Markom - From perspective of a store, I`ll need to offer you in around 250 euro MAX trade in on Tavor (for obvious reason - you are looking for what its worth on second hand market, and vat needs to be payed! so - thats minus VAT (250-21%))

Take_Her_Handy:
I think that tight bore might do well on, only I would suggest going for Madbull 6.03 Python, and type 0 Deep Fire cylinder.

T4Get:
Guess what.. I have a full grenade launcher for parts here Will give you a whole lot for 40 euro (as there were no broken ones in here for last 4-5 months, so she is not really making any odds)

oh happy days don't really need the whole lot though only the little catch that keeps it falling off while reloading any chance you could take it off?:)

Just wondering if you have any clone M4 upper Receivers lying around?

maciek87 wrote: »

Sorry lads for late reply - still has some problems with my PC (bastard of a worm on it), hence I got my own one to the office :-)

Now:
Markom - From perspective of a store, I`ll need to offer you in around 250 euro MAX trade in on Tavor (for obvious reason - you are looking for what its worth on second hand market, and vat needs to be payed! so - thats minus VAT (250-21%))

Take_Her_Handy:
I think that tight bore might do well on, only I would suggest going for Madbull 6.03 Python, and type 0 Deep Fire cylinder.

T4Get:
Guess what.. I have a full grenade launcher for parts here Will give you a whole lot for 40 euro (as there were no broken ones in here for last 4-5 months, so she is not really making any odds)

250 trade in sounds very fair to me i might be over on the weekend then

maciek87 wrote: »

TommyKnocker:
If you have spare parts for them - no problem. If you dont - than I`ll need to take a look whether mine ones will fit!

Hi Maciek

I have no spare parts unfortunately, so I was hoping that you would have spare valves for these.

I bought 2 TM P266 mags on boards second hand, to use in the P226 (display model) I got from yourself. However they have some issues

1. On one of the mags the expulsion valve, the one you use to expell gas from the mag, is jammed in. This mag is unusable as when I try to fill it the gas just vents out through the top. I tried using silicon oil on it to see if this would free it up, but it did not. So I would probably need this valve replaced.
2. On both mags when filling, there is a lot of gas which escapes, like there is not a good connection between the nozzle on the gas can and the valve in the mag. I did mention this to the guy I bought them off and he said that there was an adapter that was sometimes required when filling these mags. So maybe I just need such an adapter. Would this be something that you would have for sale or do you know if they are readily available somewhere?

So I was wondering if I had the filler valves replaced in both mags would that maybe solve the problem with the gas escaping when filling or is an adapter all I need for this? As I said I think I definately need a expulsion valve replaced in one of the mags.

Could you give me an idea of cost to have the valves replaced please including postage costs, as if it is too expensive, then I would probably just cut my losses and buy new mags.

For the record and in case it helps, the gas I have at present is this one

maciek87 wrote: »

Hmm.. I had TM P226 mags, and they dont need any adapters to be charged with gas... I dont know about the ultra-air gas (its good gas, but I dont do them - I have Red BBack gas for winter, that does good job as well), so maybe I`m wrong...?
I have some valves here, so just pop in (or send me down) the affected mags, and I`ll take a look on them for you!'
I cant say how much its gonna cost you being honest wit you, because maybe I`m gonna have to order them for you, but I dont see it being very expensive - hence the price for new TM mags, I would say it will be worth your while to try get them repaired first, instead of going for brand new ones straight away (but, we will leave that option open )

Cheers Maciek, many thanks. I will box them up and send them off to you on Monday. Should get to you on Tuesday.

maciek87 wrote: »

eadyzrx1200:
Yep, no problem! There is black and tan version available, and I`ll be happy to put my hands on one of the VFC Scars. How much you are looking for...? Is she in good nic?

Markom5a:
250.... minus vat....

TommyKnocker:
If you have spare parts for them - no problem. If you dont - than I`ll need to take a look whether mine ones will fit!

Chefburns:
I do, its from A&K M4A1 (that yoke with Gemtech Boise markings).
I would preffer to give you a deal on both lower and upper receiver as well..:rolleyes: Not that I wont sell you only the upper part, if you really need only that one.

ah the vat is the killer, what time are you open on saturday and will there be a tavor there

maciek87 wrote: »

Chefburns:
I do, its from A&K M4A1 (that yoke with Gemtech Boise markings).
I would preffer to give you a deal on both lower and upper receiver as well..:rolleyes: Not that I wont sell you only the upper part, if you really need only that one.

Well if a Dboys gearbox and other internals will fit inside it then I'd be interested in both!! Not sure if they will though i know most Mauri Clones are supposed to be interchangeable but are A&K and Dboys? How much would you be looking for it?

maciek87 wrote: »

Markom5a:
Stigmau5
Unfortunately, no VFC mp5a2s in stock, more than likely we wont be able to get them... I would try QAS..

no bother thanks for trying

The only thing broken is safety. You are better off getting cheapy... hmmm...this yoke, you know... like a table-grinder (sorry, completely forgot english word...) so than you can make new one to the size of broken one (from ie. steel plate 4mm should do...?). Saw stuff like that done couple of times...

anyway, sorry for bad news! I`ll get the broken one home and try to work out something for you (as Im lucky owner of second hand welder )



I acquired today SA1 with scope and bipod - second hand for 60 euro,
and I do have new Mauser Pro-Tac (missing box though) for 140 euro.
2x Plastic slide PT24/7 come in today as well. Ready to go for 40 euro each.

ronan keane wrote: »

Hmm Interesting and I have a few bits too get off my chest
X2 Cyma AK Mid-Caps (100 rounds)
Firefox 8.4V Stick Battery
A decent motor no spring on top
14mm clockwise silencer adapter
Am I getting close to owning one of those PT24/7?

Hmmm... Some of them sounds yummy... Whats the other end of adaptor (I mean, whats is it for?) And whats the motor off? Is she Cyma?
I`m actually starting to like boards myself :-D

Does anyone is familiar with CA M14 (long wheel based)? I heard about the problem with fire selector there today, and because I dont do them normally, I dont know
whats the gearbox like and hows she built (whether she`ll be Cyma-sh or G&G`sh like?)...
I dont fancy opening up cymish one being hones :rolleyes: