Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

UHF Output channel number from sky box.

  • 30-04-2011 02:07PM
    #1
    Machinehead
    Registered Users, Registered Users 2 Posts: 732 ✭✭✭


    I need to output the signal from my sky box to a distribution unit & onto six TV outlets. From my experience, if the chosen channel is too close to a broadcast signal on UHF from any nearby transmitters I end up with interference. I have been able to allocate all the UHF channel numbers from Mulla,Maghera & Knockmoyle except RTÉ ONE & RTÉ TWO, all I can find are "lettered" channels D,G E & H (which I think are only analogue). I understand that one needs a separation of a few channel numbers to eliminate interference.
    What I need then are the UHF channel numbers for RTÉ ONE & RTÉ TWO from both Maghera & Mullaghanish.
    Thanks.


Comments

  • #2
    ZENER
    Registered Users, Registered Users 2 Posts: 6,167 ✭✭✭ZENER


    Do you also have a rooftop antenna to receive UHF channels ? If you don't then this isn't an issue. Generally most devices use UHF Channel 36 to output on.

    Can you clarify what you're trying to do ? Your mention of only being able to find RTE1 & 2 only as analogue is causing a bit of confusion. Are you attempting to find these in digital format ?

    The Channels identified by letter are VHF channels requiring a different antenna. You can get more info here

    Ken


Advertisement