ts 100

raindodger · 20-03-2011 10:34PM #1

have a new holland ts 100 tractor a message showed up on the dash E46 and now seem to be stuck in low gears also clutch on shuttle wont work
anyone know the reason for this and is there a simple cure

reilig · 21-03-2011 09:48AM

raindodger wrote: »

have a new holland ts 100 tractor a message showed up on the dash E46 and now seem to be stuck in low gears also clutch on shuttle wont work
anyone know the reason for this and is there a simple cure

My T5050 showed the same message several months back. Turned out that I had put a carpet on the floor to keep it clean and this carpet was preventing the clutch from travelling the whole way to the floor (only by 1/4 of an inch) and this was sending the fault message. So its definitely the fault code for a clutch problem.

If she is stuck in a low gear and the clutch on the shuttle won't wrk then I doubt that there is an easy fix. Time to get the mechanic to have a look at it.

marknjb · 21-03-2011 08:46PM

i checked operators manual e 46 is not listed e45 is c1 clutch solenoid open circuit
e48 clutch disconnect switch short circuit
e40 -e45 are all to do with different clutch solenoids faults

raindodger · 22-03-2011 09:57PM

Thanks for the info. could not get in touch with my mechanic
I had to use the tractor today to agitate slurry and low and behold the e message disappears and the tractor works normally.
So have not got a clue why the problem came and then left.

8k2q1gfcz9s5d4 · 22-03-2011 10:15PM

same problem with a '98 M135 last summer with bord na mona. Tractor was a wreck though, had no reverse for the first 2 hours every day!

blue5000 · 23-03-2011 09:07AM

I've heard of a few ppl complaining about these, the shuttle is faulty in them, Is there a loose connection anywhere?

ts 100

Comments