Modding My 360 - Is it possible?

With a dashboard version of 2.0.8955 it means you have accepted an update from August 2009. This disables the JTAG hack.

All you can do with this console is flash the DVD drive firmware. So you will be looking for somebody to do this in the modding services sticky. Please note the make & model of your DVD drive (there are guides on the internet) as this does have a bearing on who will mod your drive (e.g. I will not do LiteOn drives at this time).

BlackWizard wrote: »

I have an xbox 360 at the moment. It sometimes asks me to update it and I always update it. Is this the update you are referring to? So I must have the latest dashboard version on my 360 at home then too.

Yep, those are the updates I'm speaking about That's how you got to 8955, or 9199 in your dashboard version and that's how you can't JTAG anymore

There are plenty of people who do LiteOn's by the way, just that I don't/won't do them

BlackWizard wrote: »

I forgot to post back in this thread.

I have a LiteOn Dvd drive.

So if anyone wants to mod this for me or can recommend anyone just send me a PM.

I'm contacting some people on the sticky thread. Thanks for the help TouchingVirus

Do you know what version Lite-on it is, the 8 series one has two version, version 1 all you need is a sata cable to flash it, im in limerick if you want someone to do it

what's the manufacture date of your xbox? its printed on back plate

BlackWizard wrote: »

It says 2008-08-15

well agust was the month they changed to the new drives, do you now how to open ur xbox

http://www.360drives.com/list/page28

Its probably a 7 series, you ll need a probe to do it, its piss easy if u have one

Use a hairdryer on max, point it at the sticker to heat up the sticker until it's very hot. The plastic surrounding it should be very hot too. Then peel the sticker off slowly with something flat like a credit card after lifting an edge by hand. Also, since you're on an investigative journey be very careful around the back when opening the seven clips, you'll leave some tell-tale marks if you're not very careful unless you have a 360 opening tool

One warning, do not use a heatgun which will melt the plastic casing and maybe set the sticker on fire.

Unless it happens to be an 83850C v2 which can be flashed using the half-open tray method, as mentioned on the thread before

Yeah, we know. Which is why it is best the OP tries to retain the sticker (in case they end up with one that can be flashed without voiding the warranty on the drive). So comments that imply retaining the warranty sticker intact is pointless because they'll have to open the drive, when in fact they may not have to, aren't really appropriate.

BlackWizard wrote: »

Alright thanks guys. I'll get out the hair dryer and be very careful with it this evening.

Thanks!

well if your anywhere near limerick i can do it for ya