Samsung Connection Issue

K09 · 16-09-2010 10:20PM #1

Hi,
I have bought a samsung tv but I am having trouble getting it to work with my UP box.
I get "Weak or no Signal" message.

Any ideas why this is? Connection through HDMI cable

Thanks.

djimi · 17-09-2010 08:46AM

Are you sure you are selecting the correct source for the UPC box (ie the correct HDMI or SCART source)? I get that on my Samsung tv when I select the TV tuner in the source menu (I do not have an ariel connected).

K09 · 17-09-2010 09:01AM

djimi wrote: »

Are you sure you are selecting the correct source for the UPC box (ie the correct HDMI or SCART source)? I get that on my Samsung tv when I select the TV tuner in the source menu (I do not have an ariel connected).

Hi,
I have the UPC HDMI cable connected into the HDMI2 Slot on the Samsung. That is the only cable along with the power.
I selected Source and then HDMI2 and HDMI appears in top corner with 1280 * 720 as text, but nothing appears then.

Is there something I am missing?
Thanks.

reaper180 · 17-09-2010 09:07AM

have you the live cable feed wire pushed in right at the back of upc box,

K09 · 17-09-2010 09:12AM

reaper180 wrote: »

have you the live cable feed wire pushed in right at the back of upc box,

Yes. Just checked. All seems ok there.

reaper180 · 17-09-2010 09:23AM

thats where your problem is with the live cable,,are getting a picture of the upc screen saying no signal . if so mabe the live feed (going into upc box )is not connected or kinked or even plugged out of the wall plate,

Mountjoy Mugger · 20-09-2010 01:59PM

Now and again, I have a routine I need to go through to the the UPC picture on my TV.

Have TV switched off (not standby - power off). Power down UPC box, then power it back on. Wait until the time appears on the front of the UPC box. Select a channel using remote. Then switch back on TV and switch to HDMI channel.

Samsung Connection Issue

Comments