Wireless Repeater - Wired Hub

Clareman · 20-07-2010 02:33PM #1

Hi all,

I hope to make as much sense as possible (not always guaranteed). I have a wireless network at home using the bog standard BT Voyager wireless hub. I want to setup a wired connection downstairs (save me running a lot of cables), I have a D-Link DIR 635 router. What I want to be able to do is connect the D-Link to the Voyager (wirelessly) and then be able to connect my other devices into this to allow them onto the internet. I thought it would be very straight forward, unfortunately not.

Any help will be greatly appreciated

bhickey · 21-07-2010 01:22PM

To do what you describe, you'll need a wireless router that will operate in either Wireless Client or Wireless Bridge mode and unfortunately I don't think that the D-Link router will do either.

A simple setup though would be that you'd only need to run single CAT5 ethernet cable between the 2 routers and then you should be fine.

fr_ted · 21-07-2010 09:29PM

Hi Clareman,

If you were adventurous type and willing to brick the Dlink(turn it into a brick).
Do at your own risk!
You could attempt to hack the firmware and put DD-wrt on it.

This would allow you to setup as a WDS. I have never done it with a Dlink.
http://www.dd-wrt.com/wiki/index.php/Supported_Devices

Cheers
Ted

Clareman · 22-07-2010 09:08AM

I could try to brick it, but I have it as a backup in case my other router cr@ps out, I'm resigning to the fact that I've going to have to buy some kind of wired-wireless device, does anyone have any ideas on these things? I saw something like this on ebay but amn't too sure http://cgi.ebay.ie/OpenMedia-Wifi-Bridge-Make-Your-Dreambox-Wireless-/200486939151?cmd=ViewItem&pt=UK_ConEle_SatCableFreeview_RL&hash=item2eadf3ea0f

BTW, here's a handy link for setting up WDS, mentions 3Com products but should work for anything http://www.3com.com/other/pdfs/products/en_US/104108.pdf

fr_ted · 22-07-2010 10:17PM

Hi Clareman,

Yes I have set up a WDS Using ubquiti picostations for creating a wireless webcam.

But this picostation hardware only has one ethernet port.

For what you want , I would recommend getting your hands dirty..
Buy 2..
http://www.komplett.ie/Komplett/product/ZKB_01COM/18_NETWORK/14_ROUTER/productdetails/15314078/Linksys_Wireless_G_Broadband_Router_54/WRT54GL_EU/default.aspx

install dd-wrt
http://www.dd-wrt.com/wiki/index.php/Installation

Configure your wds

http://www.dd-wrt.com/wiki/index.php/WDS_Linked_router_network

Hope you enjoy hacking the firmware
Cheers
Ted

Wireless Repeater - Wired Hub

Comments