Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum
Private Group for paid up members of Boards.ie. Join the club.
Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026
Transferring files from one laptop to another using an ethernet crossover cable
-
09-07-2010 05:18PM#1
Comments
-
-
-
-
Connect Two Computers using a Crossover Cable
Ever needed to connect two computers together to share files and folders without going through a wireless network or Router?
In order for this setup to work, there are a few things you need to make sure are setup or configured properly. I will try to go through all the different steps.
Step 1 – Configure IP Addresses
Usually, if you are using a crossover cable to connect two computers, the computers are not connected to a LAN network. In this case, you will need to configure static IP addresses for each computer.
You have to make sure that both computers have IP addresses that are on the same subnet. For example, if you give one computer an IP address of 192.168.0.1, then you should give the second computer an IP of 192.168.0.2.
If you used the above IP addresses, you should use a subnet mask of 255.255.255.0. If you use an incorrect subnet mask, the connection will not work.
Lastly, the value for the default gateway should be the same on both machines. You can pick which IP address you want to use, but use it on both computers for the default gateway. Below is how my setup looks for one computer:
Step 2 – Crossover Cable (available in most computer stores)
The second thing you need to verify is that you actually have a proper crossover cable. Basically, there are a few different types of crossover cables, but it’s best to get the standard crossover cable where the green and orange pairs are swapped and the brown and blue pairs stay in the same position.
The only pins that need to be crossed are 1,3 and 2,6. So just check your cable on both end and make sure it matches the diagram.
Step 3 – Local User Accounts
If you’re having problems accessing files both ways, you may have to create a user account on each computer that has the same name and same password. This helps get past any kind of Access is Denied errors that may pop up.
Make sure the accounts are administrator accounts also! It’s best to create a new account rather than rename a current account.
Step 4 – Disable Firewalls
(remember, you are in standalone mode so it's safe to disable temporarily).
Finally, you should disable the firewall on both computers to ensure that none of the file sharing ports are being blocked. You can do this by going to Control Panel and then Windows Firewall. Click on Off.
That’s about it! If you follow all these steps, each computer should be able to access the other properly.
-"Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid."
0 -
gadgetman496 wrote: »Connect Two Computers using a Crossover Cable
Ever needed to connect two computers together to share files and folders without going through a wireless network or Router?
In order for this setup to work, there are a few things you need to make sure are setup or configured properly. I will try to go through all the different steps.
Step 1 – Configure IP Addresses
Usually, if you are using a crossover cable to connect two computers, the computers are not connected to a LAN network. In this case, you will need to configure static IP addresses for each computer.
You have to make sure that both computers have IP addresses that are on the same subnet. For example, if you give one computer an IP address of 192.168.0.1, then you should give the second computer an IP of 192.168.0.2.
If you used the above IP addresses, you should use a subnet mask of 255.255.255.0. If you use an incorrect subnet mask, the connection will not work.
Lastly, the value for the default gateway should be the same on both machines. You can pick which IP address you want to use, but use it on both computers for the default gateway. Below is how my setup looks for one computer:
Step 2 – Crossover Cable (available in most computer stores)
The second thing you need to verify is that you actually have a proper crossover cable. Basically, there are a few different types of crossover cables, but it’s best to get the standard crossover cable where the green and orange pairs are swapped and the brown and blue pairs stay in the same position.
The only pins that need to be crossed are 1,3 and 2,6. So just check your cable on both end and make sure it matches the diagram.
Step 3 – Local User Accounts
If you’re having problems accessing files both ways, you may have to create a user account on each computer that has the same name and same password. This helps get past any kind of Access is Denied errors that may pop up.
Make sure the accounts are administrator accounts also! It’s best to create a new account rather than rename a current account.
Step 4 – Disable Firewalls
(remember, you are in standalone mode so it's safe to disable temporarily).
Finally, you should disable the firewall on both computers to ensure that none of the file sharing ports are being blocked. You can do this by going to Control Panel and then Windows Firewall. Click on Off.
That’s about it! If you follow all these steps, each computer should be able to access the other properly.
-
Not trying to annoy you, but you should cite the source !
http://helpdeskgeek.com/networking/connect-two-computers-using-a-crossover-cable/0 -
Advertisement
-
-
-
Advertisement