have problem with doorbell not working do i need an electrian

NorthDub · 28-04-2010 08:02PM #1

had a problem a few years back and got someone to look at it, what is the average call out charge for an electrician

stellarartois · 28-04-2010 08:03PM

i'd say you do need one yeah.

KoolKid · 28-04-2010 08:30PM

NorthDub wrote: »

had a problem a few years back and got someone to look at it, what is the average call out charge for an electrician

Varies a lot €40+
A door bell is basically an on/off switch.
Check power is coming from power supply
Short out door bell connections.
Check power is reaching bell.
Those 3 checks will tell you the problem ,

aido79 · 02-05-2010 11:53AM

I reckon you'd get a pretty good wireless doorbell for 40 euro+..

KoolKid · 02-05-2010 12:09PM

aido79 wrote: »

I reckon you'd get a pretty good wireless doorbell for 40 euro+..

A simple solution alright. Argos have a good range of them.

fred funk }{ · 02-05-2010 12:13PM

If you can fix the wired bell then do, wireless bells are notorious for giving trouble.

Tim M-U · 02-05-2010 04:11PM

You can get a qote from http://www.onlinetradesmen.ie/ .

Check your fusebox, if theres a fuse for it and make sure all the switchs are on.
If possible open up the doorbell and doorbell button, then make sure they are connected. Also, make sure you have your 'bell' in the doorbell working properly.. This is a simple jobby and it would be very easy to fix it yourself!:)

03-05-2010 04:21PM

Short out door bell connections.

Good advice from Koolkid, but I think he means short out the connections at the door bell push switch to see if the switch itself is faulty. Shorting out the transformer or the bell itself would not be a good idea.

I reckon you'd get a pretty good wireless doorbell for 40 euro+..

I find that they never last.

KoolKid · 03-05-2010 05:09PM

Thanks 2011. Maybe I should have clarified that better.

mazthespark · 03-05-2010 05:12PM

Tim M-U wrote: »

You can get a qote from http://www.onlinetradesmen.ie/

anybody ever used this site or got any work from it? or know anything about it even

03-05-2010 08:15PM

koolkid wrote: »

Thanks 2011. Maybe I should have clarified that better.

No bother!

Foxman09 · 10-05-2010 09:52AM

There is no need to find an electrician to repair an aged door bell. Just get a new one. I don't know how much will an electrician charge in your region. But they often charge me over $40 in our state. I just ordered a quality doorbell from sourcingmap where you will find lots of wireless doorbells. Wish it helps.

Buford T Justice · 10-05-2010 11:13AM

Depends how handy you are really.

It could be the bell, the switch the wires or the transformer in the fusebox. I'd have no problem doing it personally, as I'll tackle most jobs myself, but if you're a little uncertain or hazy, get a spark in. You can never be too careful with electrical safety.

stoneill · 18-05-2010 03:38AM

Usually the doorbell contacts inside the push button oxidises and the green copper oxide builds up prventing the circuit from being made.

Disconect power supply - take off your door bell and clean the contacts back to lovely shiny new copper and then it's back in action.

have problem with doorbell not working do i need an electrian

Comments