Airsoft News [READ FIRST POST BEFORE POSTING]

Puding · 22-03-2010 10:32PM

tonyj_mc · 22-03-2010 10:41PM

Puding wrote: »

MIC MP5

got one on the way once its hits i'll post pics and do a bit of a review, read that its compatable with marzen mags as well and the well short ones. haven't order any just yet mauzen 50 rnd ones are $40 want to see if a clone mag gets released

Harakka · 22-03-2010 10:54PM

The removable front grip and flash hider on the MP5 gives me high hopes of an SD version. That PPK is a must have, then again so is the Army Kimber and the MP5

tonyj_mc · 22-03-2010 11:04PM

Harakka wrote: »

That PPK is a must have, then again so is the Army Kimber and the MP5

i know what you mean for the €62 delivered its stupidly tempting, might wait until i'm ordering more and just throw one on the next order, that or just order one now

AirsoftForAll · 22-03-2010 11:33PM

T4RGET wrote: »

kinda boring no?....:P

Not that bad looking for the price.. :rolleyes:

Would someone have the spec of this model?

Stercus Accidit · 23-03-2010 12:51AM

Puding wrote: »

Howld the story, is that thing firing from an open bolt? 0:51 seconds in

andy_g · 23-03-2010 01:13AM

looks that way

Stercus Accidit · 23-03-2010 01:25AM

andy_g wrote: »

looks that way

Fail in that case.

evilrobotshane · 23-03-2010 08:06AM

The Uprising at Sennybridge is back in the middle of July. I was still a newbie last year so wasn't at the first installment, and the reports I got indicated that it had been marred by trigger-happy players who didn't really get it, and some Boards politics spilling over into realspace. Nevertheless I really like the idea of what they're trying to do, a more character-driven, LARP type of game, and hopefully they'll have examined problems from the first one and ironed them out. I'm putting this high on my priority list, although it's quite a list and I don't know yet if it'll make the cut due to proximity to Berget.

http://www.the-uprising.org/

Puding · 23-03-2010 08:21AM

would love to go but as you said at the moment looks way to close to the mad month of June with senny duncannon and berget :eek: and im booked to go to war and peach on the 23 of july the weekend after this so i do not think its possible

kdouglas · 23-03-2010 09:46AM

Damn, another sennybridge game I can't make it to, I'll be at war and peace.

gerrowadat · 23-03-2010 10:47AM

No berget for me this year, so 3 senny trips looks like a plan :-)

Masada · 23-03-2010 11:43AM

WE gas blowback 416 with trades hits RSOV.,:)

http://rsov.com/index.php?target=products&product_id=4978

Horse84 · 23-03-2010 05:55PM

Just to go back to that acm ppk, on boomarms it's described as having a metal lower frame and plastic slide, that's a bit of a fail for me. Anyone got anymore info on it?

doubletap · 23-03-2010 06:20PM

Horse84 wrote: »

Just to go back to that acm ppk, on boomarms it's described as having a metal lower frame and plastic slide, that's a bit of a fail for me. Anyone got anymore info on it?

Here http://www.airsoftpanda.com/product_info.php/products_id/1412
it says metal slide

ED E · 24-03-2010 04:27PM

tonyj_mc wrote: »

China made Full Metal PPK/S (BK)

•Manufacturer: China made
•Maruzen System
•Metal silde, lower frame & outer barrel
•Realistic markings on the slide and body of the pistol
•Compatible with Maruzen PPK/S Parts

$ 64 - shipping $ 22 for air mail / $30 for ems

Damn tempted.

EDIT: Where would one get a silencer for such a PPK?

Masada · 25-03-2010 01:19AM

Masada · 25-03-2010 01:21AM

Lethal_Bullet wrote: »

Damn tempted.

EDIT: Where would one get a silencer for such a PPK?

separately they are rare as rocking horse sh1t, but i do know that tony has one from a fecked Maruzen PPK somewhere,

he went to loosen the silencer with his big "act now, think later" approach and screwed it the wrong way, destroying the outter barrel. lol

Masada · 25-03-2010 01:25AM

X-Player full metal tooth piston with cut outs to lighten it, this could be good, and only 9 dolla.
http://www.px-airsoft.com/showroom/model/T0002/templateProductDetails.do?ParentId=1217141383810&currentPage=1&editCurrentLanguage=1213907847692&webId=1213907847691&productId=1269397798328001870

Masada · 25-03-2010 01:29AM

And this over on pro--t.com for a little over 5 euro.
http://www.pro--t.com/index.php?main_page=product_info&cPath=1_14&products_id=451

moggser · 25-03-2010 09:47AM

not bad for the fiver

even puts itself on the mag well.....now next Question is WTF is it

Inari · 25-03-2010 12:24PM

It's just a slightly more ergonomic grip if you decide to hold at the magwell

hightower1 · 25-03-2010 12:26PM

Its a grip for when your holding the rifle by the mag, very very nice, looks comfortable too..... will be ordering x3 of these tomorrow! Nice one masada.

Horse84 · 25-03-2010 01:47PM

Army kimber warrior and acm ppk up on asg now
http://www.airsoftglobal.com/product_info.php?products_id=11812&osCsid=mljiieq9nsvabq71ok9t2ic5e6
http://www.airsoftglobal.com/product_info.php?products_id=11811

they're giving the ppk as being full metal :-)

Masada · 25-03-2010 03:45PM

The Kimber looks the biz, from experience with Army pistols id expect this to be very nicely made., look forward to seeing it in the flesh.,

Damo 2k9 · 25-03-2010 04:30PM

Masada wrote: »

And this over on pro--t.com for a little over 5 euro.
http://www.pro--t.com/index.php?main_page=product_info&cPath=1_14&products_id=451

DESIGNED TO FIT THE AR15/M16/M4 GBB MAGAZINE WELL FOR LOWER RECEIVERS WITH REMOVABLE TRIGGER GUARD
I take it these will fit normal aegs also ?

Masada · 25-03-2010 09:12PM

It may do, but GBB rifles are closer to spec of the real steel ones so are a couple of mm thinner than an AEG, being felxible though, i reckon it would work.

hightower1 · 25-03-2010 09:30PM

Dam , was gonnna get some but 2 outta my 3 rifles are ambi releases..... balls.

Masada · 25-03-2010 09:45PM

As in magazine releases? I cant see this being a problem really.,

hightower1 · 25-03-2010 09:59PM

Just had another look now you mention it and it may fit in the dboys m4 and we pdw alright, the scars trigger guard isnt removable but A nice clean cut down the back of the grip, elbow grease and should go on nicely. Sure if the ambi release is a problem its not like its a hyper expensive mistake!

Airsoft News [READ FIRST POST BEFORE POSTING]

Comments