receiving 518khz and 490khz can this scanner do it?

hi folks am trying to set up a backup navtex system on my boat, using a radio scanner and laptop. i have the icom ic-r5 scanner, can this pickup the frequencies, below is the spec of the scanner; ill a little unsure ...
518khz and 490khz

thanks




• Frequency coverage : 0.150–1309.995MHz* (* Cellular blocked in the U.S.A. version.)
France 0.150–29.995, 50.2–51.2, 87.5–108, 144–146, 430–440, 1240–1300MHz
•Mode : AM, FM, WFM
• No. of memory channels : 1250 (1000 regular, 50 scan edges and 200 auto memory write)
• Usable temperature range:–10°C to +60°C ; +14°F to +140°F
•Tuning steps : 5, 6.25, 8.33*, 9*, 10, 12.5, 15, 20, 25, 30, 50,100kHz
(* Selectable depending on operating bands.)
• Battery requirement : 2 × AA (R6) Ni-Cd or alkaline cells
• External power supply : 6.0V DC ±5% (with BC-136A/D, CP-18A/E)
• Current drain : Rated audio 170mA
(at 3.0V DC; typical) Standby 100mA
Power save 41mA
• Antenna impedance : 50Ω (SMA)
•Dimensions : 58(W)×86(H)×27(D) mm; 29⁄32(W)×33⁄8(H)×11⁄16(D) in
(projections not included)
•Weight (approx.) : 185g; 6.5oz
• Receiver system : Triple conversion superheterodyne
• Intermediate frequencies : 1st 266.7MHz, 2nd 19.65MHz, 3rd 450kHz
• Sensitivity (except spurious points; typical):
FM 1.625–4.995MHz 0.32μV 5.000–117.995MHz 0.2μV
(12dB SINAD) 118.000–246.995MHz 0.18μV 247.000–329.995MHz 0.2μV
330.000–469.995MHz 0.18μV 470.000–999.995MHz 0.28μV
1000.000–1309.995MHz 0.35μV
WFM 76.000–108.000MHz 0.89μV 175.000–221.995MHz 0.71μV
(12dB SINAD) 470.000–770.000MHz 1.0μV
AM 0.495–4.995MHz 1.3μV 5.000–29.995MHz 0.71μV
(10dB S/N) 118.000–136.000MHz 0.56μV 222.000–246.995MHz 0.56μV
247.000–329.995MHz 0.71μV
• Selectivity AM, FM : More than 15kHz/–9dB, Less than 30kHz/–60dB
WFM More than 150kHz/–6dB
• AF output power (at 3.0V DC): 100mW typ. at 10% distortion with an 8Ω