UPC Remote Control Problems

13-02-2010 04:11PM #1

Hi, I recently got a Digital + box installed. Problem is that the remote control registers the volume as at half when the tv is completely quiet. Thus I can only turn the tv up a bit before the rc says it is at max and won't turn it up any more.

With the last rc I had the graphic for volume was the same one as the one I get when using the tv's original rc. The new rc has a volume graphic of it's own. Not sure if that makes sense or is of any use.

Any help would be greatfully appreciated.

paulm17781 · 13-02-2010 04:23PM

I'm not sure if this is what you're asking. Go to http://www.upc.ie/customersupport/manuals/ and select your box, you should be able to find a code of the UPC remote so it can change your TV volume instead of the boxes volume.

13-02-2010 04:35PM

Thanks for that, exactly what I needed.

15-02-2010 05:51PM

So, have tried all the codes in the pdf and others found online. The problem is still the same. The tv volume can be controlled though if I press the TV button on the remote, should it be this way?

With the previous rc I didn't need to switch between the UPC and TV mode in order to change the TV volume.

paulm17781 · 15-02-2010 05:54PM

No, you should be able to set it. I have mine done that way.

15-02-2010 06:01PM

Yeah, reckoned I should have been able, balls, the search for codes continues

UPC Remote Control Problems

Comments