wetsuit tear

I'd go with the black witch.. aquasure is grand for sticking materials such as Plastics, or repairing materials that drysuits are made from... Black witch is actually a liquid neoprene.

best advice to fix a tear is firstly dry the suit out.

try put the tear back together as neatly as possible (i.e. put each side of the tear side by side) and stick some strong masking tape or duck tape over it to hold it together.

Carefully turn the suit inside out. If you have sand paper give each side of the neoprene a quick little sand. Make sure the tear is clean. Fill it with black witch. Then stitch. When stitching try not to put the needle all the way through the suit (for a start you don't want to stitch the duck tape to your suit). Try get the needle and thread to only come half way through the neoprene. What I mean by this is if the suit is 3mm thick, you only want the needle and thread to go in about 1 1/2 mm. Put plenty of stitches in and it will hold.

If you are still in Lehinch, you should be able to pick up some black witch in Tom's. If not I know that they have some in the Dive centre in Kilkee. Prob cost between 5-8 euro...