Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

help with usb

  • 14-06-2007 09:10PM
    #1
    awhir
    Registered Users, Registered Users 2 Posts: 4,227 ✭✭✭


    guys i cant get my pc usbs to work.

    usbheader

    the connection on my askas is like this but missing the ground on the solid pice but there is 1 sperated like on the picture.

    instusb5
    i connected all top.ground to the right and the soild bit to the rest on the right but still nothings happening i dont have the connection for the bottem part of the usb pins any ideas ?


Comments

  • #2
    KdjaCL
    Closed Accounts Posts: 20,346 ✭✭✭✭KdjaCL


    Extra grounds they should work with just the 2 large ones set in the right order.


    kdjac


  • #3
    awhir
    Registered Users, Registered Users 2 Posts: 4,227 ✭✭✭awhir


    how do i do that.sorry i dont know **** about these usb connections as i used to never use them.


  • #4
    Cuddlesworth
    Registered Users, Registered Users 2 Posts: 14,013 ✭✭✭✭Cuddlesworth


    From the diagram, the seperate ground should be on the far left, with the ground pin on the 4 header pin being on the left hand side.

    Or what KdjaCL said, Place the two 4 pin plugs in to the right hand side, leaving a free pin on the left for a single ground pin. The ground on the 4 pin plug should face to the left of the board.


  • #5
    conzy
    Subscribers Posts: 6,408 ✭✭✭conzy


    Optional extras tbh :)


Advertisement