Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Voipstunt and 076 number ?

  • 21-04-2007 12:49PM
    #1
    zod
    Closed Accounts Posts: 2,023 ✭✭✭


    Is it possible to associate an irish voip dial in number with voipstunt ?

    I notice they recommend VOXBONE who have a minimum spend of $100 per month :eek:

    just started using a linksys ata .. thanks for any help.


Comments

  • #2
    mickoneill30
    Banned (with Prison Access) Posts: 3,073 ✭✭✭mickoneill30


    I don't think so. I needed a similar setup. I ended up going with Blueface (€100 per year) for the incoming number and then pay VoIPDiscount (same as VoIPStunt) €10 every 3 months for the free international calls.

    With that setup my landline calls are free with Blueface to Ireland and England. My international landline calls to Australia, Thailand, NZ & USA are free. And I use the €10 I pay VoIPDiscount to ring mobiles (don't do that often). So my bill for the year is €140. And that's with the better half spending about 5 hours a week on international calls.


  • #3
    zod
    Closed Accounts Posts: 2,023 ✭✭✭zod


    I have a linksys pap2 .. so there are two voip ports. I've configured the first port with the voipstunt config and connected the phone to it - free phone calls out.

    Now the second port is configured with a free 076 number from smart.

    Anyone know how to forward all calls to the 076 number on line 2 to line 1.. :D

    just spotted this :
    User 2-> Cfwd All Dest:my_line1_useid@my_external_ip_address:5060
    Line 2-> Make call without reg = yes
    Line 1 -> Answer call without reg = yes

    from here http://forum.voxilla.com/linksys-sipura-voip-support-forum/divert-incoming-line-2-calls-line-1-sipura-2000-lin-13069.html but no go as per post


Advertisement