Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum
Private Group for paid up members of Boards.ie. Join the club.
Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026
Tweaked Bios won't save after power down
-
14-05-2006 05:16PM#1Guys,
Getting really pissed with Asus and I'm considering fing this Board out too!!
The BIos in the A8n32sli delux is fantastic, maybe a little toooo much! flashed it to the latest version.
The problem is :-
1. CMOS will not save after reboot and goes back to default.
2. I've replaced the battery and no change
3. All jumpers ar ein the right place
Is there something I am missing ?
0
Comments
-
-
-
-
-
-
Advertisement
-
-
-
-
-
Crucial Ballistix used to have problems with DFI boards but the Bios that addressed the problem came with my board so I never had to flash it.........
And if i did flash the Bios I would have to do all my overclocking again, and I might not even reach 3ghz again......
Newer does not mean better in the world of Bioses:D
P.s The only bios I ever flashed was on my Dad's ASUS A8N-E so that it would detect the opteron 148 correctly, which reminds me I have to start overclocking that again
0 -
Advertisement
-
conzymaher wrote:Crucial Ballistix used to have problems with DFI boards but the Bios that addressed the problem came with my board so I never had to flash it.........
And if i did flash the Bios I would have to do all my overclocking again, and I might not even reach 3ghz again......
Newer does not mean better in the world of Bioses:D
P.s The only bios I ever flashed was on my Dad's ASUS A8N-E so that it would detect the opteron 148 correctly, which reminds me I have to start overclocking that again
LOL nice pc for your dad.0 -
Yup, He runs really demanding apps such as Microsoft word and Excel:D
It has a gig of tccd OCZ platinium Rev 2 aswell
If i go dual core with my rig, I might swap my ballistix for the OCZ platinium as it will do 300mhz plus, where as the ballistix needs 2.9 volts to do 280 and it gets very hot.........0 -
Mine is an MSI, leaving the CMOS overnight with the hope it will work then. If not I'll resort back to the previous. Need 2.8V iirc for the ram to reacj 300Mhz - damn 3000+ with the low multi.conzymaher wrote:*Cough* DFI *Cough*
Flash the bios back to the previous one. You did back up the original didnt you:p
Bios upgrades are unneccesary and dangerous unless they address a probem your having and or give better support for your components........0 -
-
It didn't - tried a different BIOS and it was grand though.
I flashed the BIOS so I could give the ram more voltage so it could reach it's rated speed. Now with the voltage upped, system won't boot over 250mhz htt without the memory on a divider. I think it's the board holding me back because the memory is rated for 300mhz 0 -
-
-
Simona1986 wrote:It didn't - tried a different BIOS and it was grand though.
I flashed the BIOS so I could give the ram more voltage so it could reach it's rated speed. Now with the voltage upped, system won't boot over 250mhz htt without the memory on a divider. I think it's the board holding me back because the memory is rated for 300mhz
getting the same problem on another Board now! WTF !! CMOS will not save on power down !! what can I do :-(0
Advertisement