smart076 & Linksys PAP

parsi · 2006-03-31 17:03:25

I received my LinksysPAP today and hooked it up to my WAG54gX2. I can receive calls fine but when I make them I get an unavailable type tone. I am dialling numbers in format 1087xxxxxxxx The log whilst dialling shows "Call1 state: invalid". I have forwarded ports on the firewall as mentioned earlier , my codec is g711u and…

31-03-2006 05:03PM

#1

parsi

Site Banned Posts: 5,904 ✭✭✭

Join Date: February 2002

Posts: 5598

I received my LinksysPAP today and hooked it up to my WAG54gX2. I can receive calls fine but when I make them I get an unavailable type tone. I am dialling numbers in format 1087xxxxxxxx

The log whilst dialling shows "Call1 state: invalid". I have forwarded ports on the firewall as mentioned earlier , my codec is g711u and use pref codec is "no"

Has anybody any ideas ?

0

Comments

#2 31-03-2006 06:26PM

parsi

Site Banned Posts: 5,904 ✭✭✭

Join Date: February 2002

Posts: 5598

This has been resolved over on the Smart forum.

Despite what the Smart info sheet said you do not have to dial 1 before the number. I had tried it but gave up after a few seconds as it looked like nothing was happening. As it turns out it was taking 16 seconds for the call to commence...

0