Removing a BIOS chip?

quarryman · 06-12-2004 03:16PM #1

What is the best method for removing a socket bios chip? I'm expecting a replacement in the post shortly and need to do a swap. I've heard there's sucha thing as a chip swapper?
I tried a small screwdriver i had and gave a go at prying it slightly but its wedged in tight.

Also, in doing so i managed to crack the housing slightly. Nothing major but enough to make me figure out a better way.

here's mine. i should point out that since its in a shuttle its fairly tricky to get at.

Occidental · 06-12-2004 03:27PM

There is a special tool which looks a bit like a tweezers, but with hooks at the end. They used to be common in the days of Maths Co-Pro's but I haven't seen one in a few years. I'm sure you'd pick one up in Maplins, or from the likes of Radionics.

Pat

Cyrus · 06-12-2004 03:38PM

what u need is something like a pin only thicker,

i used a big paper clip (really big one!) basically u need something small enough to fit the small holes at one of two corners, push it in there and lever it up, done it loads of time

dubdvd · 06-12-2004 08:39PM

i have one i got it in a pc-tool kit i got in maplins..... it was only cheap ...but if they dont have anymore give me a shout and ill give you a lend of this one

quarryman · 06-12-2004 11:14PM

tis grand i managed to jimmy it out.

thanks lads.

Removing a BIOS chip?

Comments