Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

What devices to monitor using energy plugs?

2»

Comments

  • Registered Users, Registered Users 2 Posts: 7,332 ✭✭✭CelticRambler


    We had a fridge failed after the motor overloaded. We were told this was down to poor ventilation. We've fitted a vent under the replacement fridge, but I'm still a bit paranoid.

    Your paranoia might be justified. In the good ol' days, all fridges threw off their excess heat through the pipework at the back. Nowadays, it's very common for them the radiator component to be incorporated into one or both of the sidewalls. This means you need a lot more free space left and right of the fridge than older installations, where cabinets could be smack-bang up against the wall of the fridge.

    For this reason, I'm having similar issues with "excessive" consumption by a modern fridge installed in my campervan - there's a massive amount of ventilation at the back, but it's of little use because the air needs to squeeze through the sides to carry off the heat. As a consequence, the compressor runs for longer than it should and significantly reduces my available amp-hours (an assisted ventilation solution is on the drawing board …)



Advertisement