If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

New HKC Home Assistant Integration

05-05-2024 08:16AM

#1

Eccentric Toast

Registered Users, Registered Users 2 Posts: 135 ✭✭

Join Date: February 2008

Posts: 100

Recent googling found that an account on GitHub called jasonmadigan published a home assistant integration that mimics the HKC API so you can integrate the alarm into home assistant without the use of a Konnect.
I don't have a WiFi or lan module installed yet so I haven't been able to test it. Just wondering if there is anyone on here that has? So I can justify getting a Lan or WiFi module installed.
GitHub link
https://github.com/jasonmadigan/ha-hkc/blob/main/README.md

0

Comments

#2 15-07-2024 01:55PM

Aligns

Registered Users, Registered Users 2 Posts: 10 ✭

Join Date: May 2019

Posts: 7

Have been using this for a while. Uses the same API as HKC's new app. No issues so far.

0
#3 23-10-2024 09:48AM

chrisjcbt

Registered Users, Registered Users 2 Posts: 20 ✭

Join Date: September 2018

Posts: 9

Can you share some more details? (1) is there a specific HKC interface card which needs to be added? (2) This looks to poll every 60 seconds, does that mean if someone walks past a motion sensor, the event in Home Assistant could be up to 60 seconds delayed??

0
#4 23-10-2024 06:07PM

walshtipp

Registered Users, Registered Users 2 Posts: 398 ✭✭

Join Date: April 2020

Posts: 380

https://www.boards.ie/discussion/comment/122752375#Comment_122752375

Read the caution note, the GSM-Wifi card is recommended. The mobile app polling time is apparently around 60 seconds as well.

0
#5 01-02-2025 08:47PM

stevob7

Registered Users, Registered Users 2 Posts: 22 ✭

Join Date: March 2015

Posts: 21

https://www.boards.ie/discussion/comment/122383422#Comment_122383422

Does this work with the newer HKC SW1070 panel?
Also, does it enable you to be able to arm/disarm the alarm using the Home Assistant app instead of the HKC app?
Thanks

0
#6 01-02-2025 09:17PM

Jonathan

Moderators, Education Moderators, Home & Garden Moderators Posts: 8,313 Mod ✭✭✭✭

Join Date: May 2006

Posts: 8069

https://www.boards.ie/discussion/comment/123125054#Comment_123125054

Yes.Yes.

0
Advertisement
#7 02-02-2025 12:23AM

stevob7

Registered Users, Registered Users 2 Posts: 22 ✭

Join Date: March 2015

Posts: 21

https://www.boards.ie/discussion/comment/123125155#Comment_123125155

Brill!
Also, can you turn on/off outputs like on the HKC app?
And can you display the status of each sensor like in the app too?
Lastly, I presume this integration works fine with Ethernet LAN module too?

0
#8 02-02-2025 01:07AM

Jonathan

Moderators, Education Moderators, Home & Garden Moderators Posts: 8,313 Mod ✭✭✭✭

Join Date: May 2006

Posts: 8069

https://www.boards.ie/discussion/comment/123125763#Comment_123125763

I don't have any outputs configured but I don't believe so. You should file PR or feature request on GitHub.
Yes, each zone is added as a sensor.
Ethernet/WiFi is recommended. You'll quickly exceed your monthly data allowance if using GSM.

0