Fluorescent Bulb Replacement

cullenswood · 17-11-2024 05:46PM #1

Hi,

Have been to a couple of hardwares but can't seem to find a replacement for this bulb. It seems to be a T5, and is 908mm incl pins. Its for under press lighting in the kitchen

Could anyone point me in the right direction to one please? Someone mentioned they are now banned??

Thanks

naughtysmurf · 17-11-2024 06:24PM

Don’t know where you are based but better of to try your nearest electrical wholesaler, typically they sell to the trade or companies but shouldn’t be any issues walking in and getting what you need

steamdave · 24-11-2024 09:08PM

These type of tubes are becoming harder and harder to find. Maybe time to consider an LED type replacement.

Dave

con747 · 24-11-2024 09:17PM

Change to Led with something like this, most good electrical places should have them or buy online.

https://www.amazon.co.uk/Bright-Source-Replacement-Fluorescent-Installation/dp/B0C8ZHDZTP

cullenswood · 24-11-2024 09:47PM

https://www.boards.ie/discussion/comment/122879556#Comment_122879556

Thanks for that.

Would this

https://amzn.eu/d/2MvqwX0

Replace this?

https://www.lamps-on-line.com/fluorescent-tube-smilight-diplomat-24w-908mm.html

con747 · 24-11-2024 09:52PM

https://www.boards.ie/discussion/comment/122879658#Comment_122879658

Bring the old one to a good electrical shop and they should have it in stock. Or buy off Amazon who have a great returns policy if it's wrong.

cullenswood · 18-12-2024 05:19PM

As an update, I can't find a replacement bulb anywhere!

I will change the whole unit I think, but want to be able to use the existing hard wire that is already there.

What type of a connection is this

so I can search for the correct type.

Thanks

drury.. · 18-12-2024 05:24PM

Probably can't reuse the connector

A lot of led stuff is supplied with fly leads now

New fitting is usually the correct way to go when updating

cullenswood · 18-12-2024 05:40PM

Bah, was hoping that wouldn't be the answer 😀

It's a wire that comes from the wall, so will probably have to get an electrician in to change it.

drury.. · 18-12-2024 05:45PM

https://www.boards.ie/discussion/comment/122971304#Comment_122971304

Ah the diy curse has struck

Mains inaccessible and only proprietary connector protruding

You could add another mains join but it's still a bodge ,hate when people do that

drury.. · 18-12-2024 05:51PM

Its the same problem I've been alluding to on the forum

A simple job yet a basic error made

Probably didn't even realize he was doing it wrong due to lack of awareness of electrical work

cullenswood · 18-12-2024 06:15PM

How would an electrician remedy it? Will it need tiles taken out etc?

drury.. · 18-12-2024 07:05PM

Where are the joins

Maybe they're inside the above presses there if they are you're ok

Check them

steamdave · 21-12-2024 04:44PM

https://www.boards.ie/discussion/comment/122971624#Comment_122971624

If not, then use a surface mounted joint box to take the existing wires, cutting off the old plug and then mount the new light fitting below/alongside the box. That would be the safest way of joining the existing wires to the new.

drury.. · 21-12-2024 05:01PM

https://www.boards.ie/discussion/comment/122980240#Comment_122980240

Ya

Shud have been done that way with the fixed wiring , the t+e

Bit fkd if they're behind tiles

cullenswood · 21-12-2024 06:13PM

Yeah, it's behind the tiles.

Battery operated probably best for me at this stage🫣

con747 · 21-12-2024 06:33PM

https://www.boards.ie/discussion/comment/122980473#Comment_122980473

Turn the power off and cut the wire at the connector and just join it with a junction box to the new lights cable and screw it into the underside of the cupboard. If you can wire a plug you can do that. If unsure get an electrician. Something like this.

https://www.screwfix.ie/p/debox-24a-in-line-junction-box-50-x-102-x-28-5mm-white/8692h

Fluorescent Bulb Replacement

Comments