If we do not hit our goal we will be forced to close the site.
Current status: https://keepboardsalive.com/
Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
Private Group for paid up members of Boards.ie. Join the club.
Running cable from attic to consumer box
-
10-11-2024 03:57PM#1
I need to run a Cat 6 cable from the attic to the consumer box on the ground floor, following an existing route along the back wall through an existing conduit into the utility room. An existing power cable is already using this path, and there is a conduit in the utility room where this cable runs. I’ll remove the RJ-45 connectors to make routing easier, but I want to avoid any wall damage. What’s the best way to feed the Cat 6 cable through the utility room conduit without damaging walls? Photos of the route and utility room conduit are attached.
0
Comments
-
-
-
-
I want to replace my exising grid tied inverter with a hybrid inverter (so I can add battery in future). The hybrid inverter needs to see the grid in/out feed. It can be done using a CT clamp around the grid live but the inverter is too far away from the consumer box. It seems possible to use a meter connection in the grid and direct connect over RSJ485 to the inverter. Here is a wirining diagram:
0 -
-
Advertisement
-
-
