Climote wall unit not working, no heating. Can it be overriden?

joker77 · 01-12-2023 09:00PM #1

Hi, as the title says - the Climote wall unit is not working. It's in a loop of initialising.

I tried the restart button on the bottom, no joy.

We're without heating for the weekend as their support is during office hours only. Just wondering would anyone know can this be overriden somehow to turn the heating on?

Wearb · 01-12-2023 09:47PM

Someone else will know more, but for now, is there a unit near the boiler or somewhere that this sends signal to?

mickdw · 01-12-2023 09:55PM

There is a reset button on the bottom surface around thr centre of the unit.

You.would need to push upwards with a small object.

Climote have gone into liquidation so that may be the issue but try reset anyway.

You could also as a first attempt just turn your esb main switch off and on to see if it comes back.

The control unit can be removed from back plate exposing the wiring. Some are wired with just a simple power in and power out so if you got someone who knew what you were doing they could easily remove the climote function entirely to create an always on as a stopgap.

joker77 · 01-12-2023 11:22PM

Thanks for the messages, I didn't know Climote have gone into liquidation, that's definitely worrying.

Yea the first thing I tried was to shut off the mains power - turn it off and turn it on again. No joy.

I then had a look at the climote website, and found the reset button. Tried that twice.

I'm out of options. I don't see anything near the boiler - any idea what that would look like?

G-Man · 01-12-2023 11:30PM

A local handyman would fit a simple timer in its place until you decide on what your next plan is.. ..There is much to choose from for long term thermostat.

There is unlikely to be another bypass near the boiler found without risking damaging something.. Try the local handyman and be prepared for his simple solution to fit such a timer..There is too much variation in types of thermostat for him to commit to fixing that one exactly.

Wearb · 01-12-2023 11:48PM

https://www.boards.ie/discussion/comment/121444159#Comment_121444159

I just watched an installation video. It isn't like Hive which I'm familiar with.

There isn't a receiver like there is with Hive. For now it probably best to have your previous controller reinstalled.

Wearb · 01-12-2023 11:50PM

BTW. If you can find your zone valve for heating and set it to manual, it might give you heating for now.

joker77 · 02-12-2023 10:03AM

Thanks, what would this look like?

XsApollo · 02-12-2023 10:11AM

They should be in your hot press, like a yellow ( usually ) box on the pipe. One for each zone and water.

there should be a lever on the side that you can move them manually, open it and the boiler should fire.

Wearb · 02-12-2023 10:38AM

Like above. They can be white or silver also.

The lever/slider will be slow to move (will take a slow push of 10/15 seconds) about 3/4 way along its travel there will be a notch that you will need to lock the lever into. Have a look at YouTube for zone valves and find one that shows manual opening.

joker77 · 02-12-2023 11:11AM

Excellent! Thanks both - you've saved the weekend!!

There are 2 yellow boxes beside each other, one on the pipe coming from the hot tank which I'm assuming is the water, the other being the heating.

Wearb · 02-12-2023 12:05PM

Yes. Give it a go. Remember there will be resistance, so go slowly. If you get the wrong one, just disengage it from retaining slot and go to the other one.

It'll be a bit of a chore turni g it on and off, but well worth it to have a warm place.

XsApollo · 02-12-2023 02:11PM

https://www.boards.ie/discussion/comment/121444955#Comment_121444955

Looks like 1 zone for heating and one for water,

But if you have upstairs and downstairs each zoned, there should be another one lurking around.

mickdw · 02-12-2023 03:02PM

I don't think this will activate the heating with defective climote in the system but I could be wrong.

joker77 · 02-12-2023 10:11PM

https://www.boards.ie/discussion/comment/121445529#Comment_121445529

It worked for me

Wearb · 02-12-2023 10:26PM

https://www.boards.ie/discussion/comment/121446893#Comment_121446893

🥵🔥😊

mickdw · 02-12-2023 11:45PM

https://www.boards.ie/discussion/comment/121446893#Comment_121446893

OK excellent. Didn't think it would.

XsApollo · 03-12-2023 07:09AM

For future reference or issues, if everything looks like it is working and your boiler isn't turning on or one of the zones doesn’t heat, then do the same thing again opening whichever one doesn’t work and see if the boiler starts heating.

those things fail, I’ve replaced a couple in my own house over the course of a few years.

Tippbhoy1 · 03-12-2023 08:06AM

https://www.boards.ie/discussion/comment/121447486#Comment_121447486

This also makes no sense to me. Why would any change with a valve fire the boiler.

wiz569 · 03-12-2023 06:02PM

https://www.boards.ie/discussion/comment/121447969#Comment_121447969

Normally the Time clock sends a signal to the Motorised valves to open to supply heat or hot water or both, the corresponding valve/s once opened send a signal to the boiler to fire up, in this case the same thing happens once you manually open the valves.

Tippbhoy1 · 03-12-2023 09:28PM

https://www.boards.ie/discussion/comment/121449663#Comment_121449663

I didn’t know that, good to know.

skydish79 · 16-05-2024 01:57PM

Our climote unit hub has given up working

The fact that climote has gone into liquidation is it worth getting a new climote unit or switch to another company like Hive

youtheman · 16-05-2024 08:18PM

Remember that if you manually open the zone valve to turn on your heating you will be bypassing the thermostat. So you won't have the normal heating control that the thermostat offers. So when the room reaches the required temperature (or water) just slive the valve lever back the way it was originally.

swededmonkey · 10-09-2024 08:42PM

My climote has started showing a "critical fault 7dov" message but the boiler is working. I've restarted the console and it's still there. Should it be anything to be worried about?

Hannibal · 15-09-2024 06:55PM

Is the Climote still switching the boiler on/off?

Climote wall unit not working, no heating. Can it be overriden?

Comments