Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Astec 49D

  • 17-02-2013 03:46PM
    #1
    sentenel
    Registered Users, Registered Users 2 Posts: 230 ✭✭


    hi all looking for some help...... I have the 61 call engineer battery fault so followed the great advice and step by step instructions in other posts to see the battery and what size so I can get a new one tomorrow but after putting everything back together ( numerous times checking all connections) the panel doesn't work but all the infrared sensors are on ( flashing red). Any ideas ? Everything else in the fuse board is working no fuses gone just no power at the alarm panel ? Any help would be great
    Cheers
    Joe


Comments

  • #2
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Try power it up on just the battery & then just the mains power.
    Also check that the battery cables are not squashed between the PCB board & the battery.


  • #3
    sentenel
    Registered Users, Registered Users 2 Posts: 230 ✭✭sentenel


    Thanks koolkid
    I will try that
    Cheers
    Joe


  • #4
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Also when you power it up on the mains is the orange neon coming on?


  • #5
    sentenel
    Registered Users, Registered Users 2 Posts: 230 ✭✭sentenel


    Hi Koolkid
    haven't got back to check out inside the panel yet but the light isn't coming on when the mains is on.
    cheers
    joe


  • #6
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Have you checked the mains fuse on the panel?


  • Advertisement
  • #7
    bawnBeag
    Registered Users, Registered Users 2 Posts: 186 ✭✭bawnBeag


    I know this is a long shot....I've moved to a new house and it has a 49D installed. Unbelievably its working. I was looking at installing Konnected interface for remote monitoring and arm/disarm. Just wondering if anyone knows whether its possible to program any of the contacts to arm/disarm the alarm? TIA



Advertisement